Well today i am going to install my greddy profec B spec II EBC today. Ill let you guys know how this goes. If you have please post and let me know where you mounted it at. Im thinking taking out the ash tray and putting it there. Also, i am curious as to what boost i can run it too on the stock head gasket. I am thinking no more than 9 or 10psi to play it safe.
greddy profec spec II
- Thread starter huntin5L
- Start date
9-10 sounds good, thats what I'd be running about now.
Mine is below the steering wheel, that little A/C vent place.
Mine is below the steering wheel, that little A/C vent place.
I have a PRofec B or something, but I dont think its the "spec II". Mine has just nobs, no digital readout.
It came with the car when I bought it.
It came with the car when I bought it.
The bottom one is my turbo timer, the top one is my EBC. I have an external wastegate.
Like I said, it was already on my car when I got it, but I can look where the hoses go to
Like I said, it was already on my car when I got it, but I can look where the hoses go to
I can tell where they come through, with the rest of the stuff. On the passenger side, theres a place for a bunch of wires to come out, and thats where 2 cables come out. Other than that I have no idea where they lead, only where they lead in the engine bay
huntin5L: i have one
i drilled a small hole directly to the right of where the steering column passes through the firewall. you dont know where the fuel pressure regulator is? there are vacuum diagrams online here somewhere.... http://www.cygnusx1.net/supra/install/graphics/vacuum_2h.gif
left of the intake manifold
splice hose #90999-92002
as for the solenoid wiring, i just jammed it through the big grommet that the harness passes through. use a coathanger stretched out and it pulls right through.
i drilled a small hole directly to the right of where the steering column passes through the firewall. you dont know where the fuel pressure regulator is? there are vacuum diagrams online here somewhere.... http://www.cygnusx1.net/supra/install/graphics/vacuum_2h.gif
left of the intake manifold
splice hose #90999-92002
as for the solenoid wiring, i just jammed it through the big grommet that the harness passes through. use a coathanger stretched out and it pulls right through.