1. 7MGTE complete : Currently running, no smoke, w/Mobile 1 Synthetic - (video being made of it running). It will be available in a couple of weeks.
Engine Harness is ~4 month old auto (89+) - ~$400
3” Ebay elbow and downpipe (shiny) - $130, plus another $30 to have the flanges machined flat
ALSO INCLUDED:::
Rebuild gasket set - $130 (I used the rear main seal on this engine, but the set is complete).
ARP headbolts - New/unused $120
King main & rod bearings sets - standard size ~$70
Has auto ECU, MHG with stock Toyota headbolts. Extra boxes of misc 7M parts are included ---- sensors, starters, CPS, TPSs, starters, waterpumps, alternator, 3 A/C compressors, intake plenum, fuel rail, valve covers, exhaust manifold with turbo (unknown condition) and other misc 7m-specific parts/brackets. Also have a spare main crank (stamped 6M), crank pulley, used piston set, coilpack, oilpan, etc.
About $900 in just the new stuff listed above, but this setup is easily worth over $2K if parted out. You can sell individual parts if you want… I have no time/energy. For someone local, I'll include the stock IC/piping, oil cooler and misc body/dash wiring so that you can have everything to plug-n-play into an NA or shell. I don't wanna have to ship this stuff, but will be placing it in the main For Sale section this week.
- $1250 Firm
2. 5-speed swap – Pedals, lines, master cylinder, R154 (w/o bellhousing), driveshaft, Momo-Shadow CF look shiftknob. 7M bellhousing will be provided, but I don't have it on hand yet. - $380
3. Used OS Giken single plate clutch/lightened flywheel/fork. Will work with 1JZ and 2JZ, but dunno about 7M compatibility. - $200
Engine Harness is ~4 month old auto (89+) - ~$400
3” Ebay elbow and downpipe (shiny) - $130, plus another $30 to have the flanges machined flat
ALSO INCLUDED:::
Rebuild gasket set - $130 (I used the rear main seal on this engine, but the set is complete).
ARP headbolts - New/unused $120
King main & rod bearings sets - standard size ~$70
Has auto ECU, MHG with stock Toyota headbolts. Extra boxes of misc 7M parts are included ---- sensors, starters, CPS, TPSs, starters, waterpumps, alternator, 3 A/C compressors, intake plenum, fuel rail, valve covers, exhaust manifold with turbo (unknown condition) and other misc 7m-specific parts/brackets. Also have a spare main crank (stamped 6M), crank pulley, used piston set, coilpack, oilpan, etc.
About $900 in just the new stuff listed above, but this setup is easily worth over $2K if parted out. You can sell individual parts if you want… I have no time/energy. For someone local, I'll include the stock IC/piping, oil cooler and misc body/dash wiring so that you can have everything to plug-n-play into an NA or shell. I don't wanna have to ship this stuff, but will be placing it in the main For Sale section this week.
- $1250 Firm
2. 5-speed swap – Pedals, lines, master cylinder, R154 (w/o bellhousing), driveshaft, Momo-Shadow CF look shiftknob. 7M bellhousing will be provided, but I don't have it on hand yet. - $380
3. Used OS Giken single plate clutch/lightened flywheel/fork. Will work with 1JZ and 2JZ, but dunno about 7M compatibility. - $200
