Alternator Support for a FIM (7MGTE) Cheap

[PeterSupra51984]

I just put a FIM that I bought from Ebay, and I was wondering, how would I lower the alternator without affecting other stuff using the stock tensioner and stock belt? How would I put a accelerator cable without any modification to the pedal?:icon_roll:icon_roll:icon_roll Keep in mind is better to buy one from suprasport or driftmotion... but this a cheap way to do it...

 

[PeterSupra51984]

Here is the FIM that I just bought from ebay... I have another 7MGTE so I use that one to test fit, just to make sure that everything was going to be alright...

 

[PeterSupra51984]

So I take two bars of metal I think they are like 1/4'' inch of think... I have to put some spacer so the alternator could be firm and tight

 

[PeterSupra51984]

I think here is a better look to the spacer that I use for set up the bars

 

[PeterSupra51984]

I'm still using the stock Throttle Body... and other than that the relocation of the fuel real, new fuel lines and a accelerator cable that was made from a brake line of a bicycle...