AEM 30-1100 with Aristo 2jz-gte in mk3

[TBS]

Hello!

I'm currently swapping a Aristo 2jz-gte into my late 1989- mk3! And sending my old 7m-gte- and the 2jz harness to tweak.

And I'm wondering if the AEM 30-1100 V1 will work with the Aristo 2jz-gte without any modifications?

Also I wonder if it is a good buy; A used AEM 30-1100 (approx. from 2007) without any sensors for $1100.?
Or should I buy the new V.2 AEM for 1800? ( since i live in No(r)way the total will be about 2000$ with shipping and taxes)

Final question; I have a set of new 550' injectors for my old 7m-gte. Do i need a resistor pack on the AEM?

Thanx!

 

[soapra]

If you used the 1100 box you need the resistor, if you use the V2 you wont need it. I have a new 94 TT harness that is ready to be installed in to your year car. maybe it will work better for you to use this harness Vs. sending yours in and getting one made. Just a thought. IF you are having a harness made you can use any AEM box that has all the right outputs for your engine. I've done the swap using a fresh 7M harness an also a 7MGTE AEM. Many ways to go about it. I have done it all.

 

[TBS]

Thanx, PM'd you!