A few little 7m project updates

bigaaron

Supramania Contributor
Apr 12, 2005
4,692
1
0
49
Pomona, CA
www.driftmotion.com
I got a new bov because the greddy was leaking boost at any more then 17psi with the new turbo. The new bov is a 50mm tial copy with an aluminum pipe flange adaptor. It holds boost no problem, but I didn't notice it opening fully on the dyno. I think it needs a bigger vacuum line from the manifold. Anyone else have any issues with their big bov not opening like it should?

I also got started on my coilpack relocation tonight, you can probably figure out where it's going.

GT4082 is on the way, hopefully in the next day or two.

p319495_1.jpg

p319495_2.jpg

p319495_3.jpg

p319495_4.jpg
 

bigaaron

Supramania Contributor
Apr 12, 2005
4,692
1
0
49
Pomona, CA
www.driftmotion.com
Allan_MA70 said:
what happend to the coil on plug?

The goal was to get the coilpack off the engine, and that method is fairly complicated and expensive to make. I wanted to try something else that is more simple and practical for other people. I might make a complete pnp coilpack relocation kit if this works out well.
 

91T breezen'

ROMNEY/RYAN 2012
Apr 4, 2005
1,149
0
0
NOYFB!
Okay, I feel like a dumbass,:icon_redf but where are you going to mount the coilpack?! It looks like it's attached to the turbo brace/stay, but I'm sure I'm wrong!:aigo: :icon_conf