1JZ-GTE Ecu plugs for patch harness

[Krister]

Hey,

I'm looking to make a custom patch harness for the JZZ30 1JZ-GTE ecu wiring.

Does anybody know where I can buy the ecu connectors?

 

[_EiKNARF_]

I just bought a 96 mitsubishi galant ecu off ebay for 30 bucks. Uses the same plugs. The only problem is you cant release the pins from the connector. Not really a problem so to speak, just makes soldering more tedious.

 

[supra1jz]

you can also use the ford probe they have the same plugs as the 1jz

 

[Krister]

Thanks for the replies. So it looks like the Galant ECU is the same as JZA70 and the Ford Probe is the same as JZZ30 Soarers? Am I correct?

Can the Ford Probe connector be bought seperately some where as an aftermarket / oem part? There are companies selling patch harnesses, where do they get the connector?

 

[hvyman]

the toyota 1mzfe engine uses the same plugs as well. thats like old camry. idk what you guys have in europe but there all over here in the junkyards.

 

[_EiKNARF_]

Oh sorry. Didnt notice OP was looking for JZZ30 4-row plugs. Well info is out there! Galant = jza70 2 row.

 

[hvyman]

old hondas and acuras use the 2 row as well.

toyota 1mzfe engine uses 4 row like soarer and chaser.

 

[Krister]

I would like to get new ones if possible to make them in bulk. Driftmotion must get them somewhere to make the AEM V2 patch harness for the Soarer 1JZ..

http://www.driftmotion.com/AEM-Version-2-ECU-PNP-for-Soarer-1JZ-GTE-p/dm1905.htm