Search results

Another ques? can I just wire my 3bar map sensor in where the factory one is

Where do I wire in my 3bar map sensor and my iat sensor? Anybody, hope this isnt a stupid ques.

Hey ment to tell ya Toyota tercels mr2 us the same shims, go to the junkyard rob some motors. That's what I did now I have everyone Ill ever need

Got it all figured out just took me a minute

What programs am I going to need to run my ems p/n 30-1110 87 supra. Ya Im retarded when it comes to this I just need to get it running then race shop here I come. Motor was built for 1000hp But that cost a lot so I have been running safc and 550 inj. Now I have standalone:icon_bigg. Any...

It wasn't giving me code 11 though

almost sounds like a knock sensor wiring prob. mine did that and I did a re-wire fixed it

Hey! I have tons of shims probably enough to do 20 heads. I can send ya some? Ill check on here tomorrow see if you replie

Check it out.. I just bought an aem ems, I am running the safc now with plx wideband, Just not consistant, save the money and do it rite, I have had nothing but prob. with mine always having to tweek it, running rich, and idleing issues. You should bypass the safc like its back to stock see if...

Switched to speed dens. stock turbo 18lbs boost pushin it I no, 340lph fuel pump Big intercooler an piping, arps hardware, 2mil hks head gasket,cp pistons,stock crank, hks dragger exaust, 550 hi imp injectors. anybody have this set up? Looking for maps

I have the sensors to switch to speed dens. does the map sensor just wire in the maf location? and I have 550 high imp injectors with resistor bypassed. is this going to work with the stock map so I can get the car running to get it to a dyno. I can build motors just a little stupid with the...

Holy shit! you got the motor out without pullin the tranny. its alot easer to just pull the intake plenum, and wiring harness from ecu and pull that whole bitch out complete. good job though must of been a mother lol!

FYI. you cant time a 7m if any codes ar present, never get it rite

hey man.. I had a problem like what your going through, it was my knock sensor wiring. I had to do a re-wire. mine didnt always through codes either. But that usually makes your car run super rich and if your turbo is glowing your probably to lean. Fuckin supras! there bad ass but a mother to...

I just did the mod you want to do. 550cc high impediance injectors on ebay for $260, Running 18lbs of boost, 40psi fuel pressure, runns awsome!

Its behind the driver side Strut. unplug conector find the 12v lead and build a wire the goes one to three. that way your putting 12v directly to the injectors bypassing the resistor. theres only 4 wires 1 wire runs 2 injectors dont be confused. This thread is just for tards like me:icon_razz

This thread is just a thanks to supramaina!

Hey there guys.. Well im new to hear but I read alot of your threads to get my car where it is now. Had lots of confusions when coming to what would work an what wouldnt. I have all the other upgrades such as intercooler,hks exaust,340lpm fp, adjustable FR,forged pistons, 2 mil HG, arp studs...