Search results

anyone have any suggestions??

okay so its pressure sensor. Now for the in and out settings. 6in 6out?

I guess first question would be if I'm selecting the right sensor. It's the pressure sensor right?

I just installed an safc neo. Motor is stock 1jz. soarer ecu/550cc injectors/japanese tuned ecu/stock map sensor. It starts right up on the stock computer. With the safc, it does not start I wired my safc neo into a jumper harness and am having a little problem setting it up right. On the...

are you guys making jza70 AND jzx90/jzz30 pnp kits?

yeah, after re-reading it, its not boost cut

sounds like you are hitting boost/fuel cut. i believe it cuts out at around 14-15 psi.

measured the ohms and they came out to about 7 ohms which sounds like it'll work. anyone have good concrete wiring instructions??

I need one. jzx90 1jzgte harness/ecu

just found this link. Looks like these will work. the reason I want to use these is they will be way easier to wire in. Opinions? http://www.vividracing.com/catalog/jwt-dropping-resistor-nissan-240sx-p-12658.html.

do you mind sharing a link of the exact ones you bought?? I am trying to buy a set but keep finding different coilpacks

thanks guys. I'm gonna go ahead and wire it in

I bought this resistor from a member on SF. I just want to make sure this resistor will work on a 1jz with usdm 550cc injectors. can anyone identify what car this is from?

Motor never came with a belt. I'll see what I can do. If it worked on your motor it should be fine on mine

lol. how do you figure?

do you mean without a/c? i'm not running any ac stuff motor is going in this car: http://www.supramania.com/forums/showthread.php?t=108203

I have driftmotion underdrive pulleys and an ati super damper. What serpentine belt am I supposed to use?? I searched but could not get a definite answer

thanks!

some more updates. All the little stuff takes forever! installed clutch master with ss line to slave. During bleeding, some brake fluid leaked out on the engine bay. Didnt see it til the next day when all the paint was fucked up. So I had to repaint a section of the bay Mounted the pbm...

Had a subframe party over the weekend. Both got Powered by Max subframe risers. They should help a little with the insane amount of torque that will be going through them :roflmao. A lot of times axles break b/c the angle of the cv/axle is so off due to the car being so low. Mine is the...