Car is a 1JZ with hydrofan, SC300 Alternator and no AC.
After ruining 2 belts I noticed that my power steering pump bracket was loose and everytime I revved over 4k RPM it would just slip off a tooth. So I tightened it and put one of my belts that was missing one track off it back onto the...
Details on the car:
1JZ
61mm single
E-manage blue
272 Crower cams
93 Pump gas
17.5 psi(can't go higher because my fuel pump is maxed out)
MT ET Streets on RX7 rims at 15 psi
I was having a real hard time launching the car, it kept bogging out or spinning through 1st and then bogging...
I need to upgrade my ignition system, but have a few questions.
Which HKS DLI do you guys use? Universal one?
And which one should I use? HKS DLI 2 or the original one?
Thanks for the help in advance.
I finally got my whole car together and will be needing alignment in the next week or so, but I need some input.
First of all heres my suspension setup:
Tein Flex coilovers all around
FRONT:
No front sway bar
Front Ebay strut tower bar
Stock suspension bars and bushings
REAR...
This is for a 1JZ.
I took the car off the road in december to do a lot of things to it.
Ended up changing my valve stem seals, Crower springs/retainers, Crower 272 small core cams, RPS Twin Carbon clutch and aluminum flywheel and other non engine related things.
Today I put everything...
I replaced the clutch today on my 1JZ/R154, but I have a weird problem. After I bolt the starter on and try to turn the crank pulley with a wrench, it only turns about 1/10 of a full rotation of the crank. It sounds like something hits something and it won't go past it, then I can go back about...
I bought a set off Mr.Sinister about 2 weeks ago and have been trying to install them with no luck. I disassembled the whole drivers rear suspension and have pressed most of the bushings out. Well after I installed the rear upper control arm bushings from the outside of the arm like it shows in...
I bought a set off Mr.Sinister about 2 weeks ago and have been trying to install them with no luck. I disassembled the whole drivers rear suspension and have pressed most of the bushings out. Well after I installed the rear upper control arm bushings from the outside of the arm like it shows in...
Has anyone ever installed these? These things seem to be requiring modifications. Look at the pics compared to the stock rear line and the rear line installed, fronts have the same issues.
Seems that if I install them the way I did, there is a space between the washer and the stock...
First off, I want to thank Joliroger4 for giving me great step by step instructions and answering any and all of my questions. Thanks a lot!
It took me quite some time to finish it up, but it was mostly because of lack of time and because the car is my daily driver. A couple weeks ago I...
Thinking if I should get one, seems like not many people have experience with these. What's the proper torque rating for these(triple) anyway? Seems like every site is rating them different. Let me know what you think about these clutches or at least know someone who has one and likes it.
I had this problem before, but it went away after I changed my plugs. I changed my plugs to 3330's and 500 miles after one of the cylinders started misfiring occasionally. Now 1500 miles after the plug change it's almost undrivable. Before it used to do it on hot days and now it doesn't seem to...
I still have the 02 sensor in the engine that came on the clip and has gone bad. What do you guys use as a replacement? Also does it matter how many wires are on the 02 sensor? Mine has 3, I also searched Advance auto and autozone for it, but couldn't find one.
Hi guys, I'm in the process of relocating my battery into the rear with a cutoff switch and I'd like to rewire my fuel pump as well. I've found some diagrams that X-man posted which are helpful, but I need some help with the wiring itself. How did you guys go about doing it? Much appreciated...
Hey guys, is there any kind of diagram or something to show which pin is what on the diagnostic box? I need to check my 02 sensor through it, but don't know which pins to probe. Greatly appreciated. Thanks.
This was my 1st time ever at the track and obviosly 1st time on this car. I ran on 93 pump and on 275 street tires on MKIV rims.
First time I ran against a dragster and couldnt hear my car rev, so the 60 ft was pretty bad. The car was also heak soaked from me trying to tune it on the way to...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.