Search results

when i was rolling with my car after a while the brake pedal was starting to brake at lower and lower position till the car dosent brake... so i decided to change the master cylinder. now im trying to bleed the brake system i bleeded the master cylinder, then when im bleeding the lines, i...

there must be a link somewhere on how to make it but cant find it. how should i do it? should i unplug the coupler from the TB,make an pvc hose to plug a compressor on it and cap the turbo entry side then put some air in? thanks.

ok here is my setup: ct-26 60-1 upgrade, 550cc injectors, Lex Maf, walbro fuel pump, safc neo, innovate motorsports wideband o2+ssi-4 (i can log rpm//a/f on lab-top) aeromotive afpr, im hitting fuel cut @ 10psi (boost controller to Minimum) when im trying to tune the car. i can...

im installing an innovate motorsports ssi-4 so i will be able to log rpm/boost/thorttle position/a/f ratio with my wideband lc-1. reading the ssi-4 manual, they are saying i must connect the + and - of each channel, the + to the signal, and the - to the ground of the sensor (they say the...

ok guyes im trying to boost a little more with my car. i have a ct-26 60-1 upgrade,550cc injectors,lexus maf,walbro 255lph pump and some more mods. ive put the boost @ 16 psi on my gauge (btw, my gauge looks wrong...when the car is off, it show me 2 psi, and when idling, 17.5 vacuum, but the...

i replaced my brake pads a week ago and waited for my balljoint to come home. ive left 1 of the zert fully open by error and all my brake fluid got flushed out. the problem is that i can bleed the car correctly...i pump a lot then hold pedal on the floor, open the zert and squeak,oil is...

ok guyes i bought some carbon-fiber looking switches for different application. they have a led on them and have 3 pins to get connected. 1 pin have ground sign. 1 pin have + sign 1 pin have a light sign. the thing is that i must wire my boost controller dual stage to it, the boost...

ok guyes here are my mods: 7mgte rebuilted (im in break-in period) ct-26 60-1 Lexus Maf Rc engeineering injectors 550cc Innovate motorsport wideband o2 3inch exhaust Safc Neo HKS FCD Turbosmart dual stage boost controller Spearco replica Ic + custom piping 2.5 in im not getting...

ok guyes sorry for my bad language, im french but ill do my best to explain. i bought a supra with a 15000km engine rebuilted with arp studs and cometic hg. the car had a bhd on it so i took off the block//head from the car and got it machined to a shop that knows the 7m well.i also bought a...

ok im installing a mhg 2.0 got everything machined etc, im re-using my head studs, still got some moly lube but will use it on bolt i think. question is what i do really, im not real good in english and the manual isnt clear. 1- put some 30 oil on stud part that goes to the block 2- hand...

damnit, here is the thing... my fluidyne rad is blowing lot of coolant in my overflow tank then the tank blow it on ground. i unplugged the hose coming from rad to over flow but let it in like 1 inch of coolant and know what... non-stop little bubbles coming out of the hose, car smon...

ok i have a ct-26 60-1 trim upgraded, i want to kno hat is its boost efficency with a spearco replica intercooler+aluminium piping.

i thought about these http://www.suprasport.com/Spearco-Replica-Front-Mount-Intercooler-Kit-for-Toyota-Supra-MK3_p_48-1586.html http://www.suprasport.com/LIPP-Aluminum-Intercooler-Piping_p_48-344.html will it fit great?? i know spearco replica intercooler is in and out 2.5 inches, the...

ok i got a well-built 7mgte, topline pistons//rings, wiseco cometic hg,nippon racing valves, engine got about 15 000 kmd on it. i got a walbro 255 lph pump, aeromotive fpr,3inch straight exhaust,crazy sounding unknown Bov,brand new oil pump oem,fluydine rad with flex-a-lite electric fan, and...

the question is in topic, i want to know if the ball joint from rear suspension arm 1 (check link for it) http://www.cygnusx1.net/Supra/Library/TSRM/MK3/manual.aspx?S=RA&P=62 is it removeable?? or i must get a new bar?? if i must get another one.. ne 1 got a set of 2 of them for a 89...

ok guyes me and my friend just swapped his 7mgte with bhg for a jdm 7mgte, get everything running till runnin part :S the car starts well, idle @ around 2k rpm.. we havnt put the exhaust on it yet.. the big problem is that theres a lot of coolant coming out of turbo elbow... ne 1 got an idea...

i was just wondering (im cleaning my engine bay of all those vaccum lines that are useless :P.... the vsv that control the fpr i bypassed it.... but i was just wondering for the fuel pressure regulator... if i bypass the vsv i must put vaccum at all time on the fpr?? or only when i hit the...

i was just wondering if i should buy a part car supra n/a 88 im the owner of a 89 turbo supra and i wanna know if many parts will fit it ?? my supra bath doors are broken i must know if the 88 n/a ones will fite my 89 turbo one?? what else can fit both of them ?? on the body etc.... the...

Theres white smoke coming from my turbos...when hot...and its also making a different sound when boostiing :S so its gone??

hi guyes i made a compression test ratio today here is it... i made it from the front to the back cylinder so if ur standing in front of the car the closest is #1 and the one close to the firewall is #6... #1 150 #2 160 #3 160 #4 160 #5 155 #6 145 a mechanic told me to try something...