Recent content by quark

Hi guys. I have a 1jz frontcut waiting, I want to make a 1.5jz. Is it possible to use the 1jz pistons in the 2jzge block, and would that be a good solution to lower compression? What about the 2jzge con-rod, are they any good? Reason that I ask, is that its very hard to find a 2jzgte from...

I´am pretty pleased with this.. :naughty: 0.97 bar is 14 psi

By the way,made 313hp at 5368 rpm today and a massive 471nm at 3052rpm, only at 0.97 bar.... That was nice, going to the dyno was also the reason Í have been fighting to solve this idle problem. http://www.snupa.dk/video/MOV00076.MP4

Okay.. That I will try to do :-) "With the lex AFM, the flow rate is below the designed value at idle with the 7M compare to the UZ. You could try playing with the bypass screw (close it off) to get a little more margin." Makes sense.

Who says that i builds boost? Now you make up things in your head to? It blows air around the system at idle, something like a hairdryer. More than a ct26 would ever do. Why dont you shut up, who do think YOU are, do you think you are all that? Just stay away and let people who knows...

Pictures The bov has been put into the Intake since then.

It all worked out okay with the external wastegate. I like the sound of it, and the fact that you know when it opens up.

I have build more supra/celica engine´s than you have farted. This is not a simple code 31, but if you care to read what I am writing, you would know that, so kids stay out of this. Web moderators. Please move these spammers from the thread. Everybode else I would love to hear your comment...

IwantMKIII Who is talking about switching to a narrowband sensor, do you even know what a narrowband is??? Advice like yours is dumb and unwanted. Go somewhere else. I have nothing in front of the intake. Wires have been checked from ECU to AFM. zero resistance. AFM have been taking of a...

Thank you for the reply. If its not RPM based, and its possible for it only to have problems at low rpm, then it could be the reason. The gt3076 moves alot more air than then ct26 at idle, and I was thinking that it maybe creates shockwaves in the intake. Also I am pretty sure that I have 2...

Hi guys I have a problem that I dont understand. I´am running a gt3076r turbo with 3" open exhaust all the way out. The car starts to idle very bad and gives me code 31 at idle. When I give it some gas the CEL goes away and the car drives fine. What is the problem? TPS is new due to...

Idle signal from TPS is missing, hense the high idle.

Did pulls at 2 bar and still dropping IAT temps

Look at these Original CS WTA cooler. Super t70 turbo, MS2 extra EMS. 1 bar pressure at these ones. Red line is MAT, Purble rpm