Recent content by jody

thad thing was glued to the ground nice launch

ok dit you chek your fuel press and if the car is idling and you try to ref it will it miss or is he doing it only under load ?,chek you fuel filter it migth be gloged, do you have a data log of the car when it was running good if you have than make another one now thad he is missing and compare...

dit you try to set the boost lower to see if it stop missing so you know what your problem is, are you using the vvti coils ?

love what you dit to the valve covers, what type of paint is thad

iam building my 7mgte whit one, i also had one on a forged 7mge i had in the race car and at only 14 psi made 400 hp on pomp gas,the 7mgte iam building now will go in the street car,whit a fully ported and polished head 1mm over valve and 264bc cams this one have 9.0 compression and a pro efi...

what i think you need to do is put a stiffer spring in the waste gate,what type of exhaust you are running i had the similar problem the car was running the stock exhaust and i could not raise the boost more than 15 psi, and my spring was 8 psi i change fron the 8 to a 14 and the car change in...

Hy sir iam wondering if you can tell me how you dit the 7mgte cps on your 2jz i build already two of them whit this set up but they where whit the microtech ecu it is eze to do you just order the ecu for a 7mgte and it will start now iam building number 3 and this client want to use the series 2...