Recent content by 91whitepack

hmm. Sounds like what mine did when the turbo started leaking at the manifold. Everytime ive had a boost leak the car went rich and smoked. Sometimes hit fuel cut if it was a bad enough leak.

beautiful car.

So I bought a e01 and it doesnt have the card in it. Just shows the take it easy screen. Will following these steps give me what I need to make a boank sd card make my controller work? I'm not to good with computers and dont understand half of this. Anyone want to make one for me? If so let me...

i was thinking the same thing about it being a long lasting filter but at the same time i dont think they let the fuel system set for a few years with bad gas in it either.

And thats why I opted for the suprasport softline kit. Kit was WAY easier than putting the stock back on. Good fit and no leaks on the first try. Seems like Everytime I put the stock line back on I would have a leak at the turbo. Then again I may just suck

Yeah it's not fun to get too.

Sweet car. Im loving the fitment of your rims. Also, the silver coil pack cover looks awesome. Makes me wish i had one.

Found it! Im missing the 14 inch lower cable. does this sound right for this transmission because i know the automatics have the little elbow. http://www.rockauto.com/getimage/getimage.php?imageurl=http%3A%2F%2Fwww.rockauto.com%2Finfo%2FATP%2FY-844.jpg&imagekey=65643-0&width=450

whats EPC? ill try to see what i can find.

I agree. I dont think 200 degree is going to hold up for to long.

So my supra sat up for a while and when i finally got to fixing it i noticed my speedometer cable is hanging from the car. The gear assembly is there, and the cable is there with the part you grab to screw it in. When i tried to screw it in the part on the cable with the threads on the inside...

Thanks for explaining that Cyrus. I put the exhaust manifold and the lower intake runner on before i put the head back on. I did this because of what Cyrus was saying about it being a pain while its on the car if one of the pulls out. I also took the time to clean the block up while the head was...

mine work fine with the SOGI mod also. i put H1 bulbs so i had to do a little mods to make them fit but the were not to far off. works great. Glad to see you got it figured out though.

If the exhaust studs do come out with the bolt seized on them i would get new studs and helicoil the head. When i broke mine lose (after soaking in penetrating oil) 4 of the 7 studs came out along with the threads from inside the head! Do not over torque these when installing them. I didn`t have...

Mine is a SnW 38 snub nose revolver with an extended grip. i love it