Powered by Team Mondor
Results 1 to 5 of 5

Thread: HKS VPC & GCC Settings

  1. #1
    Lurker

    Join Date
    Jun 2008
    Location
    Sub-Space
    Posts
    5

    Default HKS VPC & GCC Settings



    Anyone have the internal dip switch settings for an HKS VPC and GCC controller on an 87' with stock injectors and auto trans.? Also, correct harness connections for both controllers.

    Thanks....

  2. #2
    Lurker

    Join Date
    Aug 2006
    Location
    Melbourne, Australia
    Posts
    5

    Default Re: HKS VPC & GCC Settings

    I can't vouch for it, but i think this page may help you out:

    http://oldschool.supracentral.com/htm/hardwire.htm

    Good Luck

  3. #3
    Lurker

    Join Date
    Jun 2008
    Location
    Sub-Space
    Posts
    5

    Default Re: HKS VPC & GCC Settings

    Thats exactly what i'm looking for! Now I can do my Hawaiian Cruize! Thanks & MAHALOS, mate!

  4. #4
    Officially HKS'd
    87witmoreboost's Avatar
    Join Date
    Aug 2007
    Location
    New Hampshire
    Posts
    323

    Default Re: HKS VPC & GCC Settings

    To those looking for additional information on wiring the 7M ecu for VPC.

    http://www.supramania.com/forums/att...0&d=1164700038

    Also, see VPC guide.

    http://oldschool.supracentral.com/htm/vpc.htm
    Rebuilt!


    1987 Pearl White Turbo Targa 5-Speed, began all original, 92k miles

    On car: Entire engine rebuild, HKS Sport Turbo (at 18psi), HKS sport cat back, 3" DP, 3" test pipe, SAFC2, K&N intake, HKS TT, SOGI short-shift, 89+ tails, Tokico Illumina II, RS*R Race springs, Mustang Cobra 17x8's +25 - 245/40-17,255/40-17, AEM UEGO WB 02, AEM boost gauge, Lotek two-pod, Cooleeze hardpipes, Lex/550's/AFPR/Walbro255, black SSQV, HKS 3000 pipe, HKS EVC1, MOMO Monte Carlo/Boss Hub
    On shelf: Spearco Replica, front and rear strut tower bars



    300 ... no. 400whp, here I come...



    87 Turbo Targa, friendly monster in the making.
    00 Tundra SR5 TRD, toy mover
    99 KTM 300EXC - muddy fun
    99 KTM 380MXC - supermoto cop magnet
    94 Yamaha Waveblaster - wet fun
    94 Yamaha Waveblaster 780 mod - very wet fun
    92 Kawasaki X2 - 750 mod
    86 Honda Interceptor 500
    06 Yamaha blaster - immature fun
    02 Honda XR50 - goes good with alcohol

  5. #5
    Lurker

    Join Date
    Jun 2012
    Location
    Russia
    Posts
    4

    Default Re: HKS VPC & GCC Settings

    Hello . Please tell me where to connect wires on the harness green and black?
    Engine starts, idles, but with an increase in stall speed.
    Perhaps because of these wires are not connected?
    Attached Images Attached Images

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •