Powered by Team Mondor
Results 1 to 10 of 162

Thread: Tlo86's 2JZ Build Thread..

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Ninja Editor 'Since 05'
    tlo86's Avatar
    Join Date
    Jul 2005

    Default Tlo86's 2JZ Build Thread..

    Update *aug 22 2007*
    Update *aug 28 2007*
    Update *aug 29 2007*
    Update *sep 10 2007*
    Update *Jan 8 2008*

    Stage 1
    r154 $350 parts car
    r154 driveshaft $90 supramania.com
    1jz r154 bellhousing $350 driftmotion.com
    1jz r154 flywheel $269.99 driftmotion.com
    ARP flywheel bolts $31.50 driftmotion.com
    t4 turbo manifold $100 ebay
    2jzgte from an aristo $2100
    1jz oil pressure gauge sender adaptor $20 driftmotion.com
    used driver side front fender $20 parts car
    used front mudflaps? (old ones rusty, used ones like new) $20 parts car
    coin tray in place of TEMS buttons (Yeehaw found it!) $free parts car
    used door lock cover (inside, the one with the shitty clips to the door, have to figure out how to make them stay on...) $free
    1jzgte (supra) upper oil pan $150 for everything supramania.com
    1jzgte (supra) lower oil pan
    1jzgte oil baffle
    1jzgte oil pickup
    2jzgte oil pickup gasket $8 toyota dealer
    2jzgte thermostat from toyota + gasket $too much. 27$ toyota dealer
    used interior trim piece for center (around deck holds cig lighter etc) $10 parts car
    **earls clutch line $20 supramania.com
    **toyota oem clutch hardline turbo long $dont remember toyotapartscheap.com
    **toyota oem clutch hardline turbo short $dont remember toyotapartscheap.com
    **bought a full clutch line from driftmotion.com for about 45$ ... sick of the hardlines =/ heh
    new Clutch master cylinder $40 toyotapartscheap.com
    new slave master cylinder $58 toyotapartscheap.com
    Manual transmission pedal set (clutch, brake) $25 i think supramania.com
    new 2jz starter (ive actually had this since i owned my mkiv i just never put it in) $dont remember toyota dealer about 6 years ago
    used hood bumpers on front (they look better than a blue hose holding it) $free parts car
    walbro fuel pump (255 lph) $98 driftmotion.com
    new pleather shift boot $15? supramania.com vender
    shift knob 65$- i bought this from another vender here its a MOMO and it looks sweet.
    marlin crawler shifter seat $10 marlincrawler.com
    marlin crawler socket $8 marlincrawler.com
    BIC solid motor mounts for 89+ mounts for a jz engine $185? BICperformance.com
    speedo cable for r154 (not actually sure if i needed this but it was free so who cares hah!) parts car
    RP gear oil ( i actually bought this for my lexus' differential but never used it) napa
    power steering fluid (ATF) autozone
    toyota red coolant (this stuff is pricey) local toyota dealer
    2jzgte water pump (oem) $129.30 toyotapartscheap.com
    2jzgte rear main seal (oem) $30.36 toyotapartscheap.com
    lower radiator hose $11.02 toyotapartscheap.com
    wastegate $120 shipped from driftmotion.com
    Oil filter relocation kit $60 ish summitracing.com
    oil thermostat 40$ summitracing.com
    k&n oil filter $9
    2jzgte timing belt (gates) $75 titanmotorsports.com
    charcoal canister $40 supraforums.com
    oil pan gasket material Loctite brand $9 for a big ass tube summitracing.com
    o2 sensor bung for new downpipe $24 bicperformance.com
    oil cooler 61$ summitracing
    intake pipe 15$ ebay
    air filter k&n 54$ summitracing
    MKIV supra throttle cable $65 driftmotion.com
    2jzgte serpentine belt (power enterprise) $90 Titanmotorsports.com (ships out to me this monday)
    some iridium spark plugs 45$ NGK from a local parts store
    wiring harness $800 yikes thats pricey! but its OEM quality they dont have those for 2jz aristo engines in mkiii LOL. Dr. Tweak @ pheonixtuning.com he'll hook you up.
    oil pressure sender from a 7mgte=$free
    water pump pulley = Bought the aluminm set from driftmotion.com 60$ same size as OEM
    Intercooler hard pipes 160$ from driftmotion for everything i'll ever need hah.
    2jzgte high pressure power steering hose from an mkiv supra. This was 55$ from a parts store... beats over 300 from toyota!
    banjo for brake booster on 2jzgte intake manifold with fitting about 20$ for everything from toyotapartscheap.com
    r154 inspection covers and gaskets 120$ for both new from toyotapartscheap.com
    Turbo!!! i bought one! Turbonetics 62-1 dual ball bearing from treadstoneperformance.com
    downpipe for turbo didnt buy it but i know i am going to buy a 90 deg bend of stainless steel to weld to a vband and on the 90 deg going to weld on my o2 areas so i can at least drive it without a CE light sometime and fogure out the o2 wiring. going to get this from treadstone as well welding done locally
    Intercooler!!! i got a different one (the 1JZ one from Driftmotion)
    HKS 40mm wastegate 403$ from mvpmotorsports.com
    AEM uego 205$ mvpmotorsports.com
    2jzgte mech fan clutch and blade - 258$ toyotapartscheap.com
    Turbo Heat Blankie 150$ titanmotorsports
    Oil lines for my turbo 115$
    FPR suprasport 150$
    fuel management - MAP ECU 2 baby
    oil lines for t4 turbo - Treadstone 115$
    Clutch suprasport.com $538.83
    fpr bracket 15$ suprasport.com
    Lipp upgraded ground kit 27$ suprasport.com
    15$ for an extra ground cable for lipp
    oil pressure sensor + plug pieces supramania.com 20$
    FPR kit driftmotion 204$
    vac lines + fittings 61$ suprasport

    Stage 2
    Coil Allen bolts(twins turbo) 15$
    Second blow off valve - Synchronic Purchased 200$something
    fuel pump install
    Hook up and tune on my Map Ecu 2.
    Sandwich adaptor for oil relocation
    EGT gauge
    install my clutch
    BIC poly mounts
    driveshaft 350$
    the other two things empera makes i need to get up on since mine are thrashed
    my crankcase hoses between valve covers
    new alternator (mine was tested fine, problem solved)
    larger a/r turbine housing - Purchased 235$

    Quote Originally Posted by Syris View Post
    More people need to understand this....4rth gear is direct drive on a 5spd and is 1:1 and will give true results which is where is should be dynoed, now on a 4spd automatic it should be dynoed in 3rd which is technically direct drive as in auto's 4rth is overdrive.
    Last edited by tlo86; April 15th, 2008 at 04:42 PM.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts