Powered by Team Mondor
Page 2 of 10 FirstFirst 123456 ... LastLast
Results 11 to 20 of 99

Thread: **How to wire a soarer 1JZ into MA70**

  1. #11
    Almost civilian status...
    AF1JZ's Avatar
    Join Date
    Jun 2006
    Location
    Fredericksburg, VA
    Posts
    3,109

    Default Re: **How to wire a soarer 1JZ into MA70**

    I'll post up the pictures tomorrow of all the plugs you will use.
    1994 Toyota Supra Targa

    "I'd rather be judged by 12 than carried by 6"

  2. #12
    7Ms are for Cressidas
    drunk_medic's Avatar
    Join Date
    Apr 2005
    Location
    Woodstock, GA
    Posts
    574

    Default Re: **How to wire a soarer 1JZ into MA70**

    Quote Originally Posted by kabanimk3supra
    does anyone have something like this for the 2jz swap?
    Yes, it's on Supra.nl

    http://supras.nl/index.php?option=co...d=34&Itemid=50

  3. #13
    Junior Member

    Join Date
    Aug 2006
    Location
    Northland, New Zealand
    Posts
    76

    Default Re: **How to wire a soarer 1JZ into MA70**

    Thatd be awesome thanks, im doing jzz30 into ma70 89+ swap
    my auto sparky is coming over in about 2 weeks to look at the wiring and this should help him a lot.
    thanks

    Logan

  4. #14
    Junior Member

    Join Date
    Aug 2006
    Location
    Northland, New Zealand
    Posts
    76

    Default Re: **How to wire a soarer 1JZ into MA70**

    That link has the ma70 plugs listed but not the jzz30 onesthat are mentioned (IJ1, IJ2, IK1, IK2)

  5. #15
    boostaholic
    MA717MGTE's Avatar
    Join Date
    Apr 2005
    Location
    Bristol VA
    Posts
    404

    Default Re: **How to wire a soarer 1JZ into MA70**

    Quote Originally Posted by AF1JZ
    I'll post up the pictures tomorrow of all the plugs you will use.
    awsome i cant wait for these
    00 Tundra 4x4 access cab daily driver
    87 Turbo 5 speed, Targa shell for sale


    RIP 82,83,86,86,87T,87,89,91 sold 82,88

  6. #16
    Junior Member

    Join Date
    Aug 2006
    Location
    Northland, New Zealand
    Posts
    76

    Default Re: **How to wire a soarer 1JZ into MA70**

    Mine runs now after following this wiring explanation, would still like pictures of the plugs to make sure things are correct, and so that I can finish off the job.
    Fuel pump is just running off a straight 12v supply and I havnt hooked up my crank to my key.
    At this stage it wont rev but it does idle, as soon as you open the throttle it dies.
    Lots of work to go but this is a big step in the right direction for me
    Thank you very much

    Logan

    EDIT Wont rev due to miss from crack coilpacks...
    Last edited by 92gtapex; May 12th, 2007 at 08:35 PM.

  7. #17
    computer illiterate
    odomd's Avatar
    Join Date
    Jan 2006
    Location
    nj
    Posts
    130

    Default Re: **How to wire a soarer 1JZ into MA70**

    The plug names that are stated are from a lexas sc300 wiring diagram book I bought so I could chase these wires. Since yours is running I guess I have wired 3 now.

  8. #18
    Almost civilian status...
    AF1JZ's Avatar
    Join Date
    Jun 2006
    Location
    Fredericksburg, VA
    Posts
    3,109

    Default Re: **How to wire a soarer 1JZ into MA70**

    Quote Originally Posted by odomd
    The plug names that are stated are from a lexas sc300 wiring diagram book I bought so I could chase these wires. Since yours is running I guess I have wired 3 now.

    You're the snap bam boozel!!!
    1994 Toyota Supra Targa

    "I'd rather be judged by 12 than carried by 6"

  9. #19
    Almost civilian status...
    AF1JZ's Avatar
    Join Date
    Jun 2006
    Location
    Fredericksburg, VA
    Posts
    3,109

    Default Re: **How to wire a soarer 1JZ into MA70**

    Quote Originally Posted by 92gtapex
    EDIT Wont rev due to miss from crack coilpacks...
    Are the tops cracked or the post things. If the posts are cracked do this. Get some of the big heat shring and slide it over and shrink it.
    1994 Toyota Supra Targa

    "I'd rather be judged by 12 than carried by 6"

  10. #20
    Junior Member

    Join Date
    Aug 2006
    Location
    Northland, New Zealand
    Posts
    76

    Default Re: **How to wire a soarer 1JZ into MA70**

    Quote Originally Posted by AF1JZ
    Are the tops cracked or the post things. If the posts are cracked do this. Get some of the big heat shring and slide it over and shrink it.
    the posts are, from under the rubber boot for most of there length, heat shrink? Ive never heard of that used, worth a try
    I was going to 2 pack epoxy glue them.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •