Powered by Team Mondor
Page 29 of 29 FirstFirst ... 192526272829
Results 281 to 283 of 283

Thread: AR5 Trans Take Two: The Solstice Solution

  1. #281
    Regular Member
    rodama5anthony's Avatar
    Join Date
    Sep 2010
    Location
    Bay Area, CA
    Posts
    431

    Default Re: AR5 Trans Take Two: The Solstice Solution

    read through the thread but I didnt or missed any talk about the transmission mounts. do the r154 trans mount and bushing bolt straight on the ar5?

  2. #282
    Lurker

    Join Date
    Nov 2010
    Location
    illinois
    Posts
    15

    Default Re: AR5 Trans Take Two: The Solstice Solution

    No, you have to use the mount from the Ar5 and I made my own mount bracket. I have more pictures I can upload. My supra is around the 500hp and so far so good no issues with the transmission yet. still shifts like butter. I went with the single driveshaft and clutch disk from drift motion FYI. the real down fall to this project was, I didn't have a R154 to start with. So by the time it was complete I have around $1800. invested. It will be a lot cheaper if you already have aR154 to take the parts off of..BUT, if I do blow this tranny up they are easy to get ahold of and it will only be around $500. Bottom line is if you have a blown R154 everything will swap off of it to the AR5 except shifter housing, tranny mount clutch disk. Drive shaft can be used with adapters. I just chose to go with driftmotions driveshaft.

  3. #283
    Lurker

    Join Date
    Mar 2014
    Location
    san salvador
    Posts
    14

    Default Re: AR5 Trans Take Two: The Solstice Solution

    if anyone is still having doubts, my ar5 is still holding great with an 600whp lq4 and 3200+pounds car

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •