Powered by Team Mondor
Results 1 to 4 of 4

Thread: 7mgte, aem 2, dh61 igniter

  1. #1
    Lurker

    Join Date
    Aug 2015
    Location
    Helsinki
    Posts
    5

    Default 7mgte, aem 2, dh61 igniter

    Hi,
    A little problem. If i change my stock 7MGTE igniter to DH61 igniter (stock coils remains) what settings i have to change at aem ems 2 7mgte basemap and what are the values at them?
    I read this guide: http://www.supramania.com/forums/arc.../t-100739.html
    But it is for AEM EMS 1 only.

    Thank you very much.

  2. #2
    Grease Monkey

    Join Date
    Jul 2009
    Location
    Calgary
    Posts
    161

    Default Re: 7mgte, aem 2, dh61 igniter

    I don't have an EMS2, but the setting changes should be similar. AEM tech support will be able to help you out as well.
    Torrid red '84 P-type, Black and Grey leather, Fully Restored

    Built 7MGTE, AEM V1 EMS, R154, BOSS 60mm GT turbo, 2 1/2" IC and 3" exhaust, the works

    ROH wheels, Coilovers, BBK, Konis, Addco bars etc. etc.

    450 RWHP at 12psi, on 650CC injectors.

  3. #3
    Lurker

    Join Date
    Aug 2015
    Location
    Helsinki
    Posts
    5

    Default Re: 7mgte, aem 2, dh61 igniter

    AEM tech support didn't help me. Just asked why i'm changind the ignitor. I explain that i want to test if different ignitor helps car driving smoothly. But i didn't get any answer there anymore after that.
    I connect dh61 as you wrote in instructions, but the car didn't start, i tried to change timing too, but nothing happened. I didn't changed any values from aemtuner software 'cause they are very different than the aempro.
    coils.jpg

  4. #4
    Lurker

    Join Date
    Aug 2015
    Location
    Helsinki
    Posts
    5

    Default Re: 7mgte, aem 2, dh61 igniter

    Here is some my aemtuner settings, i can drive the car with stock ignitor, but i think that there is in the settings something wrong.accel.jpgadv pickups.jpgcoils.jpgidle.jpgsensors.jpgstart.jpgtrims.jpg

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •