Powered by Team Mondor
Results 1 to 3 of 3

Thread: How do I clock a ct-12?

  1. #1
    mkiii in hibernation
    miekedmr's Avatar
    Join Date
    Jul 2005
    Location
    Upstate NY
    Posts
    511

    Default How do I clock a ct-12?

    I finally installed these rebuilt/upgraded ct12s I got from driftmotion and the intake pipes (and more noticably the hot pipes) don't line up very well.

    one of the turbos compressor housings must be about 3-5 degrees out of rotation.

    I pulled the snap ring off the front turbo in hopes that would let me spin the compressor housing, but there must be more to it...

  2. #2
    mkiii in hibernation
    miekedmr's Avatar
    Join Date
    Jul 2005
    Location
    Upstate NY
    Posts
    511

    Default Re: How do I clock a ct-12?

    s5yvWPB.png

    It was tough to bolt down the front charge pipe to the turbo because its tugging up on the hose in the middle

  3. #3
    mkiii in hibernation
    miekedmr's Avatar
    Join Date
    Jul 2005
    Location
    Upstate NY
    Posts
    511

    Default Re: How do I clock a ct-12?

    Figured it out.

    before
    before.jpg

    after
    after.jpg

    Alignment dots which are aligned are my favorite kind of alignment dots.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •