Powered by Team Mondor
Results 1 to 6 of 6

Thread: Engine Stand Bolts

  1. #1
    Lurker

    Join Date
    Feb 2016
    Location
    The Boot
    Posts
    2

    Default Engine Stand Bolts

    I'm getting ready to rebuild a 7mge, but don't have any bolts for the engine stand. From what I understand not all engine stands will require a longer set than the ones that are in the car, but I'd rather be safe and have an extra set. All of my searches on google come up with bulk purchases, I only need 4. Does anyone have a link to a website that I could purchase these bolts from?

  2. #2
    1J-THIS
    GC89's Avatar
    Join Date
    Jun 2007
    Location
    Spokane, WA
    Posts
    922

    Default Re: Engine Stand Bolts

    Hardware store they are just m12x1.25 bolts.

    Stock headbolts work great if you have a set laying around.

    The build- Centrailia or bust........Delilahs build.

    Quote Originally Posted by ZFast300Z View Post
    Nitrous oxide is like a hot chick with an STD. You know you want to hit it but your afraid of the consequences
    You can Follow me @ryan.payne on Instagram

  3. #3
    Lurker

    Join Date
    Feb 2016
    Location
    The Boot
    Posts
    2

    Default Re: Engine Stand Bolts

    Thank you sir.

  4. #4
    1J-THIS
    GC89's Avatar
    Join Date
    Jun 2007
    Location
    Spokane, WA
    Posts
    922

    Default Re: Engine Stand Bolts

    No problem, good luck with the rebuild.

    The build- Centrailia or bust........Delilahs build.

    Quote Originally Posted by ZFast300Z View Post
    Nitrous oxide is like a hot chick with an STD. You know you want to hit it but your afraid of the consequences
    You can Follow me @ryan.payne on Instagram

  5. #5
    Supramania Regular
    Suprapowaz!(2)'s Avatar
    Join Date
    Apr 2006
    Location
    San Antonio, Tx.
    Posts
    2,911

    Default Re: Engine Stand Bolts

    If you get longer bolts then have washer available just in case you need them.
    My stock bolts wouldn't work on the engine stand. I had to get longer bolts. I needed washers to fill the gaps.

  6. #6
    Lurker of Power
    Asterix's Avatar
    Join Date
    Mar 2005
    Location
    Vienna, VA
    Posts
    418

    Default Re: Engine Stand Bolts

    The correct bolt size is M10-1.25. The bolts may have 12mm heads (flat-to-flat), but the bolt shank diameter is 10mm. The thread pitch is 1.25mm. My stand requires long bolts, 90mm long; yours may differ.

    McMaster-Carr is a great source for bolts in small quantities.
    Last edited by Asterix; April 1st, 2016 at 09:28 AM.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •