Powered by Team Mondor
Results 1 to 2 of 2

Thread: Billowy smoke on/after decel.

  1. #1
    Lurker

    Join Date
    May 2015
    Location
    Seattle
    Posts
    1

    Default Billowy smoke on/after decel.

    Hi all, I'm wondering if someone can tell me what's wrong with my turbo. I am running the stock CT-26 on my '88 7M-GTE MKIII, at around 8 psi. It still pulls and spools just fine, but on decel, I get extremely thick blue-grayish smoke clouds for a few seconds. I think oil is getting sucked into the intake through the bypass lines when air is flowing backwards through the turbo, so it only happens on idle just after decel, when pressure reverses.

    Upon inspection of piping, it looks like there's a bit of oil going through the intercooler, but not reaching all the way up to the intake manifold. However, there's also quite a bit of oil on the compressor side of the turbo. A small amount of pooling on the housing outside the compressor, and the compressor is very discolored. The oil on the compressor side was what set off alarm bells for me. There wasn't much shaft play, though, and is seemed to spin without much resistance. (I'm pretty inexperienced. It was possible to spin the compressor wheel with one hand easily, but there was definitely enough resistance to feel it; it wasnt "feather light".)

    I also recently changed and flushed the oil 600 or so miles ago, and this problem started 100 or so miles ago. I didn't prime the turbo or anything when I changed the oil. Stupid mistake. Maybe that could have caused the problem.

    Does anybody more knowledgable than me have an idea what going on with my turbo?

    Also, how likely is the turbo to fail further? I'm reluctant to spend lots of $$$ on this if I can get away with just topping up the oil, and thinking of limping until I can upgrade to something nicer.

    Thanks in advance!
    Last edited by decamun; June 18th, 2015 at 04:51 PM. Reason: Added info and clarification

  2. #2
    1J-THIS
    GC89's Avatar
    Join Date
    Jun 2007
    Location
    Spokane, WA
    Posts
    922

    Default Re: Billowy smoke on/after decel.

    Turbo seals are shot, on decel there is a sharp vacuum condition which pulls oil into the compressor side and through the ic>tb.

    Time for a rebuild

    The build- Centrailia or bust........Delilahs build.

    Quote Originally Posted by ZFast300Z View Post
    Nitrous oxide is like a hot chick with an STD. You know you want to hit it but your afraid of the consequences
    You can Follow me @ryan.payne on Instagram

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •