Powered by Team Mondor
Results 1 to 6 of 6

Thread: standalone fuel?

  1. #1
    Junior Member

    Join Date
    Apr 2007
    Location
    Louisiana
    Posts
    112

    Default standalone fuel?

    If I read right some where you can actually run injectors straight from piggyback. If so can we get around factory rev limiter like this?
    www.nautilusperformance.com
    89 toyota supra 67mm Upgrade

  2. #2
    Dang Dude! No Way Man.
    hvyman's Avatar
    Join Date
    Apr 2007
    Location
    Fullerton,CA
    Posts
    12,579

    Default Re: standalone fuel?

    no you cannot run injectors off a piggy back. piggy back will only modify the input signals the ecu uses to adjust fuel.

    You need a standalone ecu with injector drivers to run injectors and at that point you might as well control ignition as well.

  3. #3
    ECUMaster USA
    Zach's Avatar
    Join Date
    Apr 2005
    Location
    TX
    Posts
    376

    Default Re: standalone fuel?

    The DET3 is capable of driving up to 8 injectors directly (up to 4 per output channel). Most customers just use the DET3 to modify the MAF or MAP sensor signal, as you have to start from scratch building a fuel map when using the DET3 in "fuel implant" mode.
    If your factory rev limiter is fuel only, then yes, you should be able to raise the rev limit when using the DET3 in fuel implant mode.

  4. #4
    1J-THIS
    GC89's Avatar
    Join Date
    Jun 2007
    Location
    Spokane, WA
    Posts
    922

    Default Re: standalone fuel?

    There were some old school piggy back systems, I believe HKS was one which had 1-2 injectors placed on the '3000' crossover pipe before the throttle body. Not the most efficient method but it has been done, they are quite rare to find now.

    An a more important note the injectors have nothing to do with the rev limit.......................:/

    The build- Centrailia or bust........Delilahs build.

    Quote Originally Posted by ZFast300Z View Post
    Nitrous oxide is like a hot chick with an STD. You know you want to hit it but your afraid of the consequences
    You can Follow me @ryan.payne on Instagram

  5. #5
    ECUMaster USA
    Zach's Avatar
    Join Date
    Apr 2005
    Location
    TX
    Posts
    376

    Default Re: standalone fuel?

    Some factory ECUs impose the rev limit by cutting fuel, not ignition. In that case, driving the injectors from a piggyback would allow you to raise your rev limit. So yes, the signal to the injectors can be related to your rev limit.

  6. #6
    1J-THIS
    GC89's Avatar
    Join Date
    Jun 2007
    Location
    Spokane, WA
    Posts
    922

    Default Re: standalone fuel?

    Correct some do but the A70 ecu is not one of them.

    It's also not a very safe method especially on a turbo application as there is potential to induce a lean condition.

    The build- Centrailia or bust........Delilahs build.

    Quote Originally Posted by ZFast300Z View Post
    Nitrous oxide is like a hot chick with an STD. You know you want to hit it but your afraid of the consequences
    You can Follow me @ryan.payne on Instagram

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •