Powered by Team Mondor
Results 1 to 2 of 2

Thread: How to removed a punched locked crank plug?

  1. #1
    Regular Member

    Join Date
    Nov 2012
    Location
    Australia,Victoria,Melbourne
    Posts
    249

    Default How to removed a punched locked crank plug?

    Hey guys, previous builder pin punched the crank plugs to lock them in place, what's a good trick to getting them out?

    using this image for illustration since i didn't get the chance to take a picture of mine.


  2. #2
    Lurker

    Join Date
    May 2006
    Location
    Corinth, Maine
    Posts
    30

    Default Re: How to removed a punched locked crank plug?

    Well he punched the heck out of that one. Usually you burr out most of the laid over material and then with some force they come out ( you will need new plugs tho). If they are not punched to that extreme sometimes with some force they will turn out any way. A punch is just to keep them from backing themselves out not to stop a strongman from taking them out with a wrench. Hope this helps.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •