Powered by Team Mondor
Page 3 of 12 FirstFirst 1234567 ... LastLast
Results 21 to 30 of 112

Thread: ecu master digital tuner 3 on 7MGTE

  1. #21
    Yo Daddy
    supranasty's Avatar
    Join Date
    Apr 2005
    Location
    jamaica ny
    Posts
    374

    Default Re: ecu master digital tuner 3 on 7MGTE

    I posted the 7mgte wiring on page 1 post #4 . I can give you the set up if you need no problem.

    Quote Originally Posted by CarlosPTR210 View Post
    dude can you share some information like the setings and wiring, i want to buy it

    tks and your time and full support

    regards.

    carlos
    89 5sp ct26 12.21@112

  2. #22
    Regular Member

    Join Date
    Nov 2007
    Location
    NY
    Posts
    391

    Default Re: ecu master digital tuner 3 on 7MGTE

    your right here in jamaica ny so am I ,id love to see this setup? did you get it tuned locally ?

  3. #23
    Regular Member
    CarlosPTR210's Avatar
    Join Date
    Apr 2006
    Location
    Calexico,CA
    Posts
    435

    Default Re: ecu master digital tuner 3 on 7MGTE

    tks time to order one

    that power you can make and engine spects

    tks for your time and support

    carlos

    Quote Originally Posted by supranasty View Post
    I posted the 7mgte wiring on page 1 post #4 . I can give you the set up if you need no problem.

  4. #24
    Yo Daddy
    supranasty's Avatar
    Join Date
    Apr 2005
    Location
    jamaica ny
    Posts
    374

    Default Re: ecu master digital tuner 3 on 7MGTE

    Tuned by Waynespeed @ waynespeed.com

    Quote Originally Posted by RiyadYar View Post
    your right here in jamaica ny so am I ,id love to see this setup? did you get it tuned locally ?
    89 5sp ct26 12.21@112

  5. #25
    ECUMaster USA
    Zach's Avatar
    Join Date
    Apr 2005
    Location
    TX
    Posts
    376

    Default Re: ecu master digital tuner 3 on 7MGTE

    Quote Originally Posted by trashcanhead View Post
    Just ordered a det3 from Zach at ECUmaster. I am wanting to do a walk through for everybody and some videos as well to get people on board since its hard to find anything on it .its on its way now and were running it on a 7mgte also .

    I have your wiring diagram and wanted to ask you a couple questions on it . why you had to do the multiplex delete if that was to be able to do timing adjust or if it has to be done to get it to work at all .I want timing adjust as well.

    Also is the KS on your diagram is knock sensors there was a KS also by the afm meter on the diagram. could you tell me what the second KS is? and did you hook up only one knock sensor as well.

    Did you hook up the unit to a afr 02 sensor to get a reading for it and what pin did you hook it to .

    It would really help to have your saved map if you could email me it to have a good starting point id really appreciate it. Also just to know what to do where in the software without being blind. my Email is strokeitimports@Kc.rr.com
    Any pics you can take of wiring and under hood of map and air temp sensor would be so helpful too of your wiring and install if you get time .

    I really hope you could help me out with this and i will help everyone else out once i get it going . Appreciate your time thanks Dave ,
    KS would be the Karman sensor (the airflow meter).

    You can input the 0-5v signal from your wideband to any of the analog inputs on the device. They're user configurable.

    It's critical that you read the entire manual before installing the device. The DET3 isn't like an AFC where you can just wire it up and run through the menus, it's a far more sophisticated device. The manual is available for download on our site along with the software. It's around 45 pages, but half of that is just graphics and screenshots.

    In terms of underhood wiring, since you're using the boost control feature you'll have two wires for the boost control solenoid, and two wires for the air temp sensor. The rest of the wiring will be at the ECU. The MAP sensor for the DET3 is built into the box, so you simply run a vacuum line from the intake manifold to the device. All of the wiring is covered in detail in the manual.

  6. #26
    Yo Daddy
    supranasty's Avatar
    Join Date
    Apr 2005
    Location
    jamaica ny
    Posts
    374

    Default Re: ecu master digital tuner 3 on 7MGTE

    set up tables.png



    My Set up Table using the MAF
    89 5sp ct26 12.21@112

  7. #27
    Yo Daddy
    supranasty's Avatar
    Join Date
    Apr 2005
    Location
    jamaica ny
    Posts
    374

    Default Re: ecu master digital tuner 3 on 7MGTE

    Ignition Configuration.jpg


    My Ignition set up
    89 5sp ct26 12.21@112

  8. #28
    Yo Daddy
    supranasty's Avatar
    Join Date
    Apr 2005
    Location
    jamaica ny
    Posts
    374

    Default Re: ecu master digital tuner 3 on 7MGTE

    Frequency Configuration.png


    My Frequency Set Up using the MAF
    89 5sp ct26 12.21@112

  9. #29
    Yo Daddy
    supranasty's Avatar
    Join Date
    Apr 2005
    Location
    jamaica ny
    Posts
    374

    Default Re: ecu master digital tuner 3 on 7MGTE

    BaseMap dt3 MAF.png



    My first Base Map On My 7MGTE with AFM connected. This was before Tuning...
    I was using the Lex/550 mod.for this Basemap.

    The MAF To MAP conversion comes after You Tune Your car on the MAF.
    You need this tune to do you conversion to MAP. Then you retune The MAP and done.

    Your 2step can go on your Clutch switch. I have my 2step set up on the speed sensor, You MUST Be on MAP for that .I cant wait to 2step at the track this year... CT26 LOL Nice but im sure it will kill it soon..8-10lbs launch.

    Funny but this thing has more stuff I have not even touched. cool PIGGY
    Last edited by supranasty; May 2nd, 2014 at 09:00 PM.
    89 5sp ct26 12.21@112

  10. #30
    Lurker

    Join Date
    Apr 2014
    Location
    smithville mo
    Posts
    2

    Default Re: ecu master digital tuner 3 on 7MGTE

    thanks for these

    I wanted to ask if the 2 step switch could be the clutch switch glad you mentioned it.really excited to see what all it can do.

    I researched alot on this unit and there is not much in english about it that was why i mentioned making a walk through for it.
    glad to have your help and Zach at ecumaster also.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •