Powered by Team Mondor
Page 5 of 5 FirstFirst 12345
Results 41 to 47 of 47

Thread: 1ggte (u) information

  1. #41
    7M POWAH! ;)
    suprra_girl's Avatar
    Join Date
    Mar 2005
    Location
    Auckland, New Zealand
    Posts
    1,776

    Default Re: 1ggte(u) information

    Should be the same but if you're unsure hop over to www.toyodiy.com and check the part numbers
    Sent from my 7 Trophy using Board Express
    Quote Originally Posted by Yellow 13
    1JZ isnt even fit to wipe the oil from my 7M's leaky rear seal.

  2. #42
    Lurker

    Join Date
    Feb 2013
    Location
    new zealand
    Posts
    6

    Default Re: 1ggte(u) information

    Quote Originally Posted by suprra_girl View Post
    Should be the same but if you're unsure hop over to www.toyodiy.com and check the part numbers
    Sent from my 7 Trophy using Board Express
    thx for the help i will look into it soon...

  3. #43
    Lurker

    Join Date
    Feb 2013
    Location
    new zealand
    Posts
    6

    Default Re: 1ggte(u) information

    Just wondering guys if it is possible to put a R154 gear box on a 1g-gte??

  4. #44
    1JZ-GTE powered Supra.
    martin p's Avatar
    Join Date
    Feb 2006
    Location
    East coast. UK
    Posts
    214

    Default Re: 1ggte(u) information

    Quote Originally Posted by eizan1892 View Post
    Just wondering guys if it is possible to put a R154 gear box on a 1g-gte??
    If you can get an Adaptor plate made, as There isn't a R154 to 1G bellhousing As far as I know.
    1JZ-GTE with mods
    7M-GTE GT limited Aero Manual with Mods

  5. #45
    Lurker

    Join Date
    Feb 2013
    Location
    new zealand
    Posts
    6

    Default Re: 1ggte(u) information

    Quote Originally Posted by martin p View Post
    If you can get an Adaptor plate made, as There isn't a R154 to 1G bellhousing As far as I know.
    thanks for the advice.

    also there are a few things i want ask. will MA70 coilovers and oil filter relocation kit fit on a GA70??

  6. #46
    Lurker
    Join Date
    May 2015
    Location
    Charlotte, NC
    Posts
    1

    Default Re: 1ggte(u) information

    just looking for a definitive answer to clutch fitment. I have a gz20 soarer with 3rd gen 1g (w58). I'm in the states so, what clutch fits? Looking for USDM cross reference.

  7. #47
    Lurker

    Join Date
    Mar 2009
    Location
    Austin
    Posts
    47

    Default Re: 1ggte(u) information

    I just looked up the parts and the clutch and pressure plate are unique to the 1ggte. Probably due to the flywheel bolt pattern. I'd venture to say the 7mge clutch disc would work, but I'm not sure the 7mge pressure plate would bolt up to the flywheel.

    86-93 ma70 7mge Supra throwout bearing is what the 1ggte uses so that's an easy one to get.

    Should note that the OEM flywheel for the 1ggte is no longer available. The only option is the JUN lightweight which is custom made to order. PM me and I'll put you touch with a dealer that can get these parts if they are available.
    Last edited by Ryan_V; October 15th, 2015 at 08:15 AM.
    1995 Supra SE diamond white 5sp hardtop 45k mile
    1995 Supra 5sp hardtop
    1989 Toyota Mark 2 GT

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •