1jz belt no Ac or Powersteering

[Tim]

I am having a very hard time finding a belt for my project car. Its a 1974 260z with a 1jz and I am running no AC or powersteering. I have heard about using the s2000 tensioner pully, but I can't find any more info on what year s2000 tensioner pulley to use, and what belt to use with this setup. I have searched, but have not come up with much. Can anyone help?

[88mkIIIproject]

I had a similar problem when my power steering pump went out, check out my thread from a while back:

http://www.supramania.com/forums/showthread.php?t=53804

part numbers are in there for the pulley and belt, for no a/c or p/s

[88mkIIIproject]

btw, from what I remember, I had to use a fender washer and grind out the inner diameter a bit to put behind the new ribbed pulley, so it wouldn't rub against the timing cover.

[THE1JZSPECIAL]

SO basically the idler pulley is from an s2000 correct?

[86_sports_1jz]

yes i don't think it matters what year they are either, i think they are all the same. i did a search on SF and found all my answers from old threads, if you do the same you should be able to find them too

[fstlane88]

Belt: Goodyear-4060390

New Idler Pulley: Dayco-49017 76mm 8 rib

Pulled from this thread...

http://www.supraforums.com/forum/sho....php?p=5450278

CAN WE PLEASE MAKE THIS A STICKEY!!!! No offense to the OP but this question literally comes up at least once a month.