+ Reply to Thread
Page 1 of 12 1234511 ... LastLast
Results 1 to 10 of 111

Thread: what does it take to get 500hp out of a 7mgte

  1. #1
    Lurker
    88redma70's Avatar
    Join Date
    Dec 2007
    Location
    portsmouth virginia
    Posts
    28

    Default what does it take to get 500hp out of a 7mgte

    i got my motor out the car and cant decide what i wanna do and i have 3000 dollars to spend on it

  2. #2

    Default Re: what does it take to get 500hp out of a 7mgte

    Quote Originally Posted by 88redma70
    i got my motor out the car and cant decide what i wanna do and i have 3000 dollars to spend on it
    Read my build thread i should be right around 500 but i have to finish the car.
    Last edited by suprahooked; December 31st, 2007 at 08:57 PM.
    http://www.cygnusx1.net/supra/TechTi...ror_codes.aspx
    My Build Thread http://www.supramania.com/forums/showthread.php?t=34229
    7MGTE ,Je pistons .20 over , king main and rod bearings , new oil pump, new aux. shaft bearings , eagle rods, 3mm hks head gasket, arp main ,rods and head bolts and studs, aem cam gears, hks 50mm wastegate, hks longrunner manifold,Percison gt4088 turbo,greddy type s bov, 4x12x24 xs power intercooler, RPS max 3200 clutch kit , new pilot shaft bearing and throwout bearing, New hoses, Cooleeze upper rad pipe, RC 550 fuel injectors, Lexas afm, A-1000 fuel pump,sump in fuel tank, afr, Still needs installed:Ron's long runner FFIM, QT-45, hurst line-loc,Aem-Ems,greddy catch can

  3. #3
    Banned
    Doward's Avatar
    Join Date
    Jan 2006
    Location
    Alachua, FL
    Posts
    4,273

    Default Re: what does it take to get 500hp out of a 7mgte

    $3000 isn't enough to hit 500hp reliably.

  4. #4
    Lurker
    88redma70's Avatar
    Join Date
    Dec 2007
    Location
    portsmouth virginia
    Posts
    28

    Default Re: what does it take to get 500hp out of a 7mgte

    so what is the best way to get the most power with 3000 dollars reliably

  5. #5

    Default Re: what does it take to get 500hp out of a 7mgte

    Quote Originally Posted by 88redma70
    so what is the best way to get the most power with 3000 dollars reliably
    Search.
    http://www.cygnusx1.net/supra/TechTi...ror_codes.aspx
    My Build Thread http://www.supramania.com/forums/showthread.php?t=34229
    7MGTE ,Je pistons .20 over , king main and rod bearings , new oil pump, new aux. shaft bearings , eagle rods, 3mm hks head gasket, arp main ,rods and head bolts and studs, aem cam gears, hks 50mm wastegate, hks longrunner manifold,Percison gt4088 turbo,greddy type s bov, 4x12x24 xs power intercooler, RPS max 3200 clutch kit , new pilot shaft bearing and throwout bearing, New hoses, Cooleeze upper rad pipe, RC 550 fuel injectors, Lexas afm, A-1000 fuel pump,sump in fuel tank, afr, Still needs installed:Ron's long runner FFIM, QT-45, hurst line-loc,Aem-Ems,greddy catch can

  6. #6
    Junior Member
    88tsupra's Avatar
    Join Date
    Mar 2007
    Location
    long beach
    Posts
    143

    Default Re: what does it take to get 500hp out of a 7mgte

    I wouldn't know the best way to to reach 500+hp because I'm still around 200hp

    But I know me and a friend plan on building up my bottom end first. While allowing me to still rebuild the head.

    But then you have to think about the details.
    Like will the clutch/flywheel/pressure plate hold up.
    Drive shaft being 18+years old
    etc etc

    Try upgraded CT26-550cc injectors-walbro 255 fuel pump-exhaust-BIC DDP-Filter-

    that right there sounds like it would please the power need for a little time

  7. #7
    Banned
    Doward's Avatar
    Join Date
    Jan 2006
    Location
    Alachua, FL
    Posts
    4,273

    Default Re: what does it take to get 500hp out of a 7mgte

    From bone stock?

    Do a MHG, get some new 550cc injectors, a MAFT-Pro, a Wideband O2, new fuel pump, replacing anything rubber in the engine bay, and a CT26.

    That'll run you close to $3000, and you should be able to get 350-400rwhp, reliably.

  8. #8
    Grumpy Old Man
    IJ.'s Avatar
    Join Date
    Mar 2005
    Location
    I come from a land down under
    Posts
    39,421

    Default Re: what does it take to get 500hp out of a 7mgte

    $$$ then add some more $$$ and when it's just about right a few more $$$ can't hurt

  9. #9
    Almost done.
    MassSupra89's Avatar
    Join Date
    Nov 2005
    Location
    MA
    Posts
    1,709

    Default Re: what does it take to get 500hp out of a 7mgte

    Quote Originally Posted by IJ.
    $$$ then add some more $$$ and when it's just about right a few more $$$ can't hurt

    Bingo. The past year I've been coming home and losing 80% of every paycheck on my way through the garage into my house. I'm planning on 500hp on a budget build and I'm already past 5k at least, I still have at least another 1,500-2k to spend.

  10. #10
    naughty by nature
    suprahero's Avatar
    Join Date
    Aug 2005
    Location
    Roll Tide
    Posts
    14,658

    Default Re: what does it take to get 500hp out of a 7mgte

    Quote Originally Posted by namkiii
    7m = reliably

    best thing would get a front clip of a 1jz supra and do the swap
    I did not put this young man up to this IJ, I swear..........and for the record, he can't do the 1jz swap for $3000.00 either. He'd be better off building his 7m with some really good internals and replacing the stock oil pump with whatever it is you guys replace the stock oilpumps with............and then do lots and lots of praying and maybe sacrifice a virgin or two............

    FEAR A GOVERNMENT THAT FEARS YOUR GUN

    http://www.break.com/index/one-of-th...-made-2218472#

+ Reply to Thread
Page 1 of 12 1234511 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink