+ Reply to Thread
Page 1 of 61 123451151 ... LastLast
Results 1 to 10 of 609

Thread: CNC Cam Covers with Extras

  1. #1
    Arizona Performance
    arz's Avatar
    Join Date
    Nov 2005
    Location
    Mesa, AZ
    Posts
    948

    Default CNC Cam Covers with Extras

    We are completely sold out of these, thanks to all that made them possible.

    At this time we do not anticipate making these again. If you are serious about these, please post at the end and start a list if you are interested in getting on a list, but be aware I will need 10 people to commit a 50% non refundable deposit once we start on them. I wont need 50% to get on the list, I will need the 50% down when I agree to start making them again. I anticipate a 1-2 month wait for them to be done being machined, and we will start after the last person has paid their 50%. If we get any to back out before all 10 have paid their 50% I will refund all of your money, less any PP fees, if their are any.

    I know there are a ton of pages to look through but I will try to cover the quick details here in this first post. These are ultra rare and I only have a few of these left, if you wanted a one of a kind look and the ultimate in 7M performance and looks. then you need to get these before they are gone.

    THE PRICES:
    1. Cam Covers, $695.00 (includes all required fasteners) you will need a donor 7MGTE cam covers to steal the internal baffles from.
    2. Coil Pack Relocation Kit (CPRK), $75.00 (includes all required fasteners) this will allow you to install the factory Coil Packs in the Valley between the Billet Cam Covers. (they do not work with the factory Cam Covers)
    3. Center Cover $275.00 (requires the installation of the CPRK) these will not work with the factory Cam Covers.
    4. AN fittings for all 3 locations $67.00 the to top PCV locations are a -10 port o-ring size and the Crank Case Vent (side vent up front) is a -12 port o-ring. We can supply -8 or -10 AN male fittings for the top (PCV) and -12 or -16 for the side (Crank Case vent).

    Please visit our website for more details and to contact us directly.
    http://www.ArizonaPerformance.com


    Bear with me as I am in the process of updating this page and the website over the next few days. (10-19-08)


    Edit: 7-18-07 Here are the pages with the latest photos, I added these to the first post for now, so people don't have to surf 55+ pages of chatter. More Videos and photos will be added soon so check back often.

    http://www.supramania.com/forums/sho...=41974&page=12

    http://www.supramania.com/forums/sho...=41974&page=14

    Edit: 7-26-07
    Heres the price http://www.supramania.com/forums/sho...&postcount=180

    Edit: 12-04-07
    more photos http://www.supramania.com/forums/sho...=41974&page=33

    Edit: 01-02-08
    Latest photos http://www.supramania.com/forums/sho...&postcount=356

    Edit: 02-18-08
    Latest photos http://www.supramania.com/forums/sho...&postcount=440

    Edit: 02-21-08
    http://www.supramania.com/forums/sho...&postcount=465

    Edit: 01-08-10 Installed on customers cars
    http://www.supramania.com/forums/sho...&postcount=548

    Duane's car
    http://www.supramania.com/forums/sho...&postcount=560
    Last edited by arz; April 30th, 2012 at 12:27 PM.

  2. #2
    Supramania Regular
    Idealsupra's Avatar
    Join Date
    Mar 2005
    Location
    Orlando
    Posts
    2,391

    Default Re: CNC Rocker covers with Extras

    im assuming you mean valve covers?

  3. #3
    thread killer
    pimptrizkit's Avatar
    Join Date
    Dec 2005
    Location
    vancouver Wa
    Posts
    1,573

    Default Re: CNC Rocker covers with Extras

    i've already relocated my throttle cable and coil packs but I am interested in getting some valve covers with some sort of style to them.
    ~~~MoDs~~~~
    full 3inch w/cat soon test pipe meganR GT turbo muffler~2 peice, 2.5" hard pipes~maft pro-speed density~lc-1 wide band~walbro~255lph~3.93 lsd swap~5spd swap~arp's w/ titian 1.4mm mhg~85ft/lbs~stock ct-26--13psi@ 325whp/318ftlbs

  4. #4
    Arizona Performance
    arz's Avatar
    Join Date
    Nov 2005
    Location
    Mesa, AZ
    Posts
    948

    Default Re: CNC Rocker covers with Extras

    Ideal: Yea I will have to get that title edited, I am so used to calling them "Rocker covers" in the old school Nissan world.

    I have models for completely CNC'd ones and had been toying with the idea of sheet metal ones too but figured I would ask your guys opinion before I started cutting chips.

    If you guys want to chime in and have a photo of something you just love then please shoot me photo.
    Last edited by arz; April 9th, 2007 at 03:23 PM.

  5. #5
    Administrator
    GrimJack's Avatar
    Join Date
    Dec 1969
    Location
    Richmond, BC, Canada
    Posts
    12,535
    Blog Entries
    17

    Default Re: CNC Rocker covers with Extras

    Hells yes! I've been dying to see someone come up with something sexy for this ugly problem for years, and I've had my fingers crossed that it was going to be you ever since I got your CPS cover.

  6. #6
    Speakers?
    Justin's Avatar
    Join Date
    Mar 2005
    Location
    Spokane, Wa
    Posts
    1,707

    Default Re: CNC Rocker covers with Extras

    Lets see some designs or something!!!! I just got word I may be getting my FFIM sooner than expected!!

  7. #7
    Arizona Performance
    arz's Avatar
    Join Date
    Nov 2005
    Location
    Mesa, AZ
    Posts
    948

    Default Re: CNC Rocker covers with Extras

    I have a lot of details that look like a mess in the model but are not shown here. This Kit is very well thought out in functionality and features. I will release these details when I have REAL valve covers in a few weeks. For now these virtual photos will have to do. Rest assured if I can cover all the details of complete bolt-on racing brakes front and rear, I think you will be surprised at all the things this complete kit does.





    Dont worry I didnt forget the crank case breathers, Also notice the Gasket groove. This design retains the factory Valve cover gasket, but ditches those stupid ugly washers for the fasteners. I realize those were for insulation not sealing, dont worry I have it covered.

    I have thought of every possible angle with this product. If your curious please ask.

    Heres a few to get you started:

    What about the Coilpacks? Covered!!! Wait and see on the real covers.

    What about Spark plug valley covers? Same answer!

    Oh wait what about the Throttle cable? JUST WAIT!!!

    Oh what about the internal valve cover baffles? Done!!!

    Fasteners? Included!!!

    Price? Im working on that, but it will probably be a tiered deal because of all the different options.

    I have spent months and months gathering all the parts and modeling every possible detail and having the head measured in a CMM.

    Hope you like it, please let me know what you think.
    Last edited by arz; April 10th, 2007 at 08:41 AM.

  8. #8
    Lag hater
    yannis-supras's Avatar
    Join Date
    Jun 2005
    Location
    Athens, Greece
    Posts
    331

    Default Re: CNC Rocker covers with Extras

    Hmm very interesting!!! Looking forward to see the actual samples as well as how the above tasks are tackled. I'd be definately in depending on pricing also of course!
    _______________
    Yannis ~ (one of IJ.'s disciples )



    my restoration ----------------------- suspension & brakes ---- 7MGTE Twin Turbo

  9. #9
    thread killer
    pimptrizkit's Avatar
    Join Date
    Dec 2005
    Location
    vancouver Wa
    Posts
    1,573

    Default Re: CNC Rocker covers with Extras

    I hope I can afford this when you make them!
    ~~~MoDs~~~~
    full 3inch w/cat soon test pipe meganR GT turbo muffler~2 peice, 2.5" hard pipes~maft pro-speed density~lc-1 wide band~walbro~255lph~3.93 lsd swap~5spd swap~arp's w/ titian 1.4mm mhg~85ft/lbs~stock ct-26--13psi@ 325whp/318ftlbs

  10. #10
    Authorized Vendor
    empera's Avatar
    Join Date
    Mar 2005
    Location
    Philly.
    Posts
    5,014

    Default Re: CNC Rocker covers with Extras

    lol the mk3 community (including myself) will be the first to say
    "i hope i can afford these"
    But yea ARZ from those cads, they look great, cant wait to see the final product.

+ Reply to Thread
Page 1 of 61 123451151 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink