The sensor is about 85.00 new, as a kit with connector it will be around 98.00 bucks each. Im just waiting on pricing for the adapter and I will give you guys a final price.
Re: New Knock sensors for use with AEM EMS or ANY other EMS that supports Knock contr
The sensor is about 85.00 new, as a kit with connector it will be around 98.00 bucks each. Im just waiting on pricing for the adapter and I will give you guys a final price.
- "The Bitterness of Poor Quality Remains Long after the Sweetness of Low Price is Forgotten"
Check our vendor section for 7m and JZ parts blowout and crazy projects.
Authorized dealers for AEM, haltech, HKS, Greddy, KOYO,Tomei and many others.
AEM EMS! Haltech! We know it better then any of our competitors. For best price please call. we buy Direct from AEM and Haltech.
We have the experience, we make the power
www.kaizenmotorsports.com
(626)757-8540
jose@kaizenmotorsports.com
Re: New Knock sensors for use with AEM EMS or ANY other EMS that supports Knock contr
Waiting for updates, I want one of these for my Megasquirt
1977 Celica
-7M-GTE/R154
-Megasquirt 2 v3 self tuned
11.2 @ 122MPH
Re: New Knock sensors for use with AEM EMS or ANY other EMS that supports Knock contr
Any updates on these jose?
Re: New Knock sensors for use with AEM EMS or ANY other EMS that supports Knock contr
I would be interested in these as well. I'm getting noise up to 4 volts above 5500 RPM that blocks any useful inputs from the stock sensors even when running the engine up to 6750 without hitting boost at all.
Torrid red '84 P-type, Black and Grey leather, Fully Restored
Built 7MGTE, AEM V1 EMS, R154, BOSS 60mm GT turbo, 2 1/2" IC and 3" exhaust, the works
ROH wheels, Coilovers, BBK, Konis, Addco bars etc. etc.
450 RWHP at 12psi, on 650CC injectors.
Re: New Knock sensors for use with AEM EMS or ANY other EMS that supports Knock contr
Im interested. What sensors are you using? Bosh?
Bump.
- Chip
Re: New Knock sensors for use with AEM EMS or ANY other EMS that supports Knock contr
Would these work with the AEM V1?
Re: New Knock sensors for use with AEM EMS or ANY other EMS that supports Knock contr
They should - it is bad for noise filtering so they should be ideal. I am running a V1 and the knock control is useless above 6000 RPM.
Torrid red '84 P-type, Black and Grey leather, Fully Restored
Built 7MGTE, AEM V1 EMS, R154, BOSS 60mm GT turbo, 2 1/2" IC and 3" exhaust, the works
ROH wheels, Coilovers, BBK, Konis, Addco bars etc. etc.
450 RWHP at 12psi, on 650CC injectors.
Re: New Knock sensors for use with AEM EMS or ANY other EMS that supports Knock contr
is Kaizen still open? their website no longer works.
Re: New Knock sensors for use with AEM EMS or ANY other EMS that supports Knock contr
We are still going strong. We have not yet setup a site. maybe before the end of the year we will have a basic one runing. You can pm me if you need anything. We have been busy with harness and EMS wiring, along with out normal work load that we have not been around the forum much.
- "The Bitterness of Poor Quality Remains Long after the Sweetness of Low Price is Forgotten"
Check our vendor section for 7m and JZ parts blowout and crazy projects.
Authorized dealers for AEM, haltech, HKS, Greddy, KOYO,Tomei and many others.
AEM EMS! Haltech! We know it better then any of our competitors. For best price please call. we buy Direct from AEM and Haltech.
We have the experience, we make the power
www.kaizenmotorsports.com
(626)757-8540
jose@kaizenmotorsports.com
Re: New Knock sensors for use with AEM EMS or ANY other EMS that supports Knock contr
sent you a PM
Posting Permissions
Reply With Quote
Bookmarks