-
April 6th, 2012, 07:07 PM
#1
Junior Member
would a bov make your car stall out ?
can someone tell or show me with pictures how to connect the hks bov the right way please
thanks
-
April 6th, 2012, 07:16 PM
#2
324k and going strong
Yes it can stall. Unmetered air escaping causes it to spike rich.
You need to recirculate it to between the turbo and afm.
Sent from my ADR6400L using Tapatalk
Ron Paul 2012

-
April 6th, 2012, 07:36 PM
#3
Junior Member
Re: would a bov make your car stall out ?
its recirculated i just nee to know were the vaccum hose from the bov connect to ?
-
April 7th, 2012, 03:45 AM
#4
Junior Member
Re: would a bov make your car stall out ?
i got a aem wideband and when its just idling its between 13.7 and 15 but when i got to drive it goes straight to 10 and my car doesnt stall out till i start build boost like at about 2500 rpms i have a new iac"idle air control",afm,tps,alternator and knock sensors so if you can please post a diagram on how to connect a hks bov the correct way mine was connected to the fpr but i moved it to the little vaccum port on the top of the throttle body on the 7mgte
-
April 7th, 2012, 11:35 AM
#5
324k and going strong
Re: would a bov make your car stall out ?
Ron Paul 2012

-
April 7th, 2012, 03:34 PM
#6
Junior Member
Re: would a bov make your car stall out ?
-
April 7th, 2012, 04:24 PM
#7
324k and going strong
No. It's plumbed like it though. You should plumb yours the same way...
Sent from my ADR6400L using Tapatalk
Ron Paul 2012

Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Forum Rules
Links monetized by
VigLink
Bookmarks