345whp, 454lbs torque at 19 psiOriginally Posted by alvinheu
On a mustang dyno( they are suppose to read a little beat lower)
Re: Custom CT26, CT12a, and CT20 Upgrades
345whp, 454lbs torque at 19 psi
On a mustang dyno( they are suppose to read a little beat lower)
Re: Custom CT26, CT12a, and CT20 Upgrades
Vacation? does this mean the shop is back to normal and all the turbos are done?
Well My turbos at least? Next week will be 5 months.
I know there was alot of stuff to be done on mine.
I cant wait to see those darn things.
Last edited by forgottenzone; July 26th, 2012 at 11:29 AM.
Back to normal yes. Turbos done? Lol no.
And I've been running into issues with your hot sides. Got one completly done with larger flapper, but sometimes it sticks so I don't wanna ceramic coat it until I can figure it out.
I'll take photos. I think I may have to disassemble it again and remoddify it.
It sucks, it's totally different then the 1jz turbos.
'91 Supra Hard Top - Building 700rwhp 1J -Achieved-
T70 turbo, 1200cc injectors, proefi 128 ecu, Flex fuel, E85, dual 044, BC 272 cams, BC springs & retainers, HKS ADJ Cam, HKS timing belt, 1ZZ COP, Tial Q BOV,1-piece alum driveshaft, ACT extreme PP, ACT 4-Puck Ceramic, MC thrust washer, 3.91 LSD 1.5way, 14.2' Front BBK, 13.8" Rear BBK, StopTech Pads, ST sway bars, F/R Poly bushings, Tein Mono Flex Coilovers, EDFC, Recaro Interior
525rwhp@18psi
722rwhp@30psi
00.00 @ 000mph -- 60ft: 0.0 sec
TURBO UPGRADES!
Billet CT26 upgrades
CLIMATE CONTROL LED UPGRADES!
Re: Custom CT26, CT12a, and CT20 Upgrades
I pmed you about rebuilding a turbo...ever get that message?
Replace your Ebrake and/or ShiftBoots!
OPEN FOR BUSINESS!!
No I just went back trough my Pm's, didn't see anything. I've already had to clear my inbox cause I only get 2000 Pm's then I have to clear it.
'91 Supra Hard Top - Building 700rwhp 1J -Achieved-
T70 turbo, 1200cc injectors, proefi 128 ecu, Flex fuel, E85, dual 044, BC 272 cams, BC springs & retainers, HKS ADJ Cam, HKS timing belt, 1ZZ COP, Tial Q BOV,1-piece alum driveshaft, ACT extreme PP, ACT 4-Puck Ceramic, MC thrust washer, 3.91 LSD 1.5way, 14.2' Front BBK, 13.8" Rear BBK, StopTech Pads, ST sway bars, F/R Poly bushings, Tein Mono Flex Coilovers, EDFC, Recaro Interior
525rwhp@18psi
722rwhp@30psi
00.00 @ 000mph -- 60ft: 0.0 sec
TURBO UPGRADES!
CLIMATE CONTROL LED UPGRADES!
Re: Custom CT26, CT12a, and CT20 Upgrades
My wife always complains about my Hot Sides as well.... He He.
Deffinitely get it going right. Am I still the only one that did CT20's? I thought there was at least 1 more guy in here that you did.
Or am I the only one that wanted upgraded flappers?
Well then i guess you need a vacation, when you come back rested youll get it fixed.
Hey Albert I have a stock ct-26 that has a hair line crack on the exhaust side but I wanted to see how much it would be to get it made into a 57 trim and coated thanks pm me if you can
Re: Custom CT26, CT12a, and CT20 Upgrades
Hey Albert sent you a pm lastnight awaiting your reply.
Back from vacation, Pm's replied.
Lol everyone decided to make orders will I'm on vacation. So I'm pretty backed up now, or will be once all the turbos start flying in. Gonna get a lot done today, and all the ct26s I have out to the rebuilder.
'91 Supra Hard Top - Building 700rwhp 1J -Achieved-
T70 turbo, 1200cc injectors, proefi 128 ecu, Flex fuel, E85, dual 044, BC 272 cams, BC springs & retainers, HKS ADJ Cam, HKS timing belt, 1ZZ COP, Tial Q BOV,1-piece alum driveshaft, ACT extreme PP, ACT 4-Puck Ceramic, MC thrust washer, 3.91 LSD 1.5way, 14.2' Front BBK, 13.8" Rear BBK, StopTech Pads, ST sway bars, F/R Poly bushings, Tein Mono Flex Coilovers, EDFC, Recaro Interior
525rwhp@18psi
722rwhp@30psi
00.00 @ 000mph -- 60ft: 0.0 sec
TURBO UPGRADES!
CLIMATE CONTROL LED UPGRADES!
Re: Custom CT26, CT12a, and CT20 Upgrades
You got my 12a's today, hopefully they made it in one piece. I was concerned about them considering the distance the box had to travel.
1988 1JZ auto...Blew up the 61...6765 Billet time.
Posting Permissions
Reply With Quote
Bookmarks