+ Reply to Thread
Page 57 of 74 FirstFirst ... 74753545556575859606167 ... LastLast
Results 561 to 570 of 731

Thread: Custom CT26, CT12a, and CT20 Upgrades

  1. #561

    Default Re: Custom CT26, CT12a, and CT20 Upgrades

    Vacation? does this mean the shop is back to normal and all the turbos are done?
    Well My turbos at least? Next week will be 5 months.
    I know there was alot of stuff to be done on mine.
    I cant wait to see those darn things.
    Last edited by forgottenzone; July 26th, 2012 at 11:29 AM.

  2. #562
    Custom CT26, CT12a, CT20 upgrades
    Albert's Avatar
    Join Date
    May 2009
    Location
    Tempe, AZ
    Posts
    2,009

    Default

    Back to normal yes. Turbos done? Lol no.

    And I've been running into issues with your hot sides. Got one completly done with larger flapper, but sometimes it sticks so I don't wanna ceramic coat it until I can figure it out.

    I'll take photos. I think I may have to disassemble it again and remoddify it.

    It sucks, it's totally different then the 1jz turbos.
    '91 Supra Hard Top - Building 700rwhp 1J -Achieved-
    T70 turbo, 1200cc injectors, proefi 128 ecu, Flex fuel, E85, dual 044, BC 272 cams, BC springs & retainers, HKS ADJ Cam, HKS timing belt, 1ZZ COP, Tial Q BOV,1-piece alum driveshaft, ACT extreme PP, ACT 4-Puck Ceramic, MC thrust washer, 3.91 LSD 1.5way, 14.2' Front BBK, 13.8" Rear BBK, StopTech Pads, ST sway bars, F/R Poly bushings, Tein Mono Flex Coilovers, EDFC, Recaro Interior
    525rwhp@18psi
    722rwhp@30psi
    00.00 @ 000mph -- 60ft: 0.0 sec



    TURBO UPGRADES!
    Billet CT26 upgrades
    Steel CT12a upgrades
    Steel CT20 upgrades
    CLIMATE CONTROL LED UPGRADES!

  3. #563
    Authorized Vendor
    empera's Avatar
    Join Date
    Mar 2005
    Location
    Philly.
    Posts
    5,041

    Default Re: Custom CT26, CT12a, and CT20 Upgrades

    I pmed you about rebuilding a turbo...ever get that message?

  4. #564
    Custom CT26, CT12a, CT20 upgrades
    Albert's Avatar
    Join Date
    May 2009
    Location
    Tempe, AZ
    Posts
    2,009

    Default

    No I just went back trough my Pm's, didn't see anything. I've already had to clear my inbox cause I only get 2000 Pm's then I have to clear it.
    '91 Supra Hard Top - Building 700rwhp 1J -Achieved-
    T70 turbo, 1200cc injectors, proefi 128 ecu, Flex fuel, E85, dual 044, BC 272 cams, BC springs & retainers, HKS ADJ Cam, HKS timing belt, 1ZZ COP, Tial Q BOV,1-piece alum driveshaft, ACT extreme PP, ACT 4-Puck Ceramic, MC thrust washer, 3.91 LSD 1.5way, 14.2' Front BBK, 13.8" Rear BBK, StopTech Pads, ST sway bars, F/R Poly bushings, Tein Mono Flex Coilovers, EDFC, Recaro Interior
    525rwhp@18psi
    722rwhp@30psi
    00.00 @ 000mph -- 60ft: 0.0 sec



    TURBO UPGRADES!
    Billet CT26 upgrades
    Steel CT12a upgrades
    Steel CT20 upgrades
    CLIMATE CONTROL LED UPGRADES!

  5. #565

    Default Re: Custom CT26, CT12a, and CT20 Upgrades

    My wife always complains about my Hot Sides as well.... He He.
    Deffinitely get it going right. Am I still the only one that did CT20's? I thought there was at least 1 more guy in here that you did.
    Or am I the only one that wanted upgraded flappers?
    Well then i guess you need a vacation, when you come back rested youll get it fixed.

  6. #566
    Junior Member
    Charles D.'s Avatar
    Join Date
    Apr 2011
    Location
    Dallas,TX
    Posts
    77

    Default

    Hey Albert I have a stock ct-26 that has a hair line crack on the exhaust side but I wanted to see how much it would be to get it made into a 57 trim and coated thanks pm me if you can

  7. #567
    Junior Member
    al lewis's Avatar
    Join Date
    Mar 2007
    Location
    dominica
    Posts
    96

    Default Re: Custom CT26, CT12a, and CT20 Upgrades

    Hey Albert sent you a pm lastnight awaiting your reply.

  8. #568
    Custom CT26, CT12a, CT20 upgrades
    Albert's Avatar
    Join Date
    May 2009
    Location
    Tempe, AZ
    Posts
    2,009

    Default

    Back from vacation, Pm's replied.

    Lol everyone decided to make orders will I'm on vacation. So I'm pretty backed up now, or will be once all the turbos start flying in. Gonna get a lot done today, and all the ct26s I have out to the rebuilder.
    '91 Supra Hard Top - Building 700rwhp 1J -Achieved-
    T70 turbo, 1200cc injectors, proefi 128 ecu, Flex fuel, E85, dual 044, BC 272 cams, BC springs & retainers, HKS ADJ Cam, HKS timing belt, 1ZZ COP, Tial Q BOV,1-piece alum driveshaft, ACT extreme PP, ACT 4-Puck Ceramic, MC thrust washer, 3.91 LSD 1.5way, 14.2' Front BBK, 13.8" Rear BBK, StopTech Pads, ST sway bars, F/R Poly bushings, Tein Mono Flex Coilovers, EDFC, Recaro Interior
    525rwhp@18psi
    722rwhp@30psi
    00.00 @ 000mph -- 60ft: 0.0 sec



    TURBO UPGRADES!
    Billet CT26 upgrades
    Steel CT12a upgrades
    Steel CT20 upgrades
    CLIMATE CONTROL LED UPGRADES!

  9. #569
    Single time!!
    fstlane88's Avatar
    Join Date
    Apr 2005
    Location
    South FL
    Posts
    539

    Default Re: Custom CT26, CT12a, and CT20 Upgrades

    You got my 12a's today, hopefully they made it in one piece. I was concerned about them considering the distance the box had to travel.


    1988 1JZ auto...Sold.

  10. #570
    Dude WTF!!!
    alvinheu's Avatar
    Join Date
    Jul 2012
    Location
    CALI
    Posts
    15

    Default Re: Custom CT26, CT12a, and CT20 Upgrades

    any numbers yet on the 58trim billet wheel???

+ Reply to Thread
Page 57 of 74 FirstFirst ... 74753545556575859606167 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink