Are you still running E85. I'm still not set on which route to go, E85 or methanol injection
w/ the 550's I already have. I just want to drive the car now. this sucks waiting for parts.
Re: Starting build #2 , I WANT 500 RWHP...
Are you still running E85. I'm still not set on which route to go, E85 or methanol injection
w/ the 550's I already have. I just want to drive the car now. this sucks waiting for parts.
400rwhp @ 14 psi, more to come w/ 25 psi...
CP's .020", Eagles, fidanza flywheel, Spec 3 clutch, clevittes,
driftmotion 67mm kit, profec b II, AEM EMS, aeromotive AFPR,
E85, 1350cc FIC injectors, dual aermotive stealth pumps.
My Build Thread--->
Re: Starting build #2 , I WANT 500 RWHP...
Got some progress pics. Started polishing the valve covers and intake manifold.
400rwhp @ 14 psi, more to come w/ 25 psi...
CP's .020", Eagles, fidanza flywheel, Spec 3 clutch, clevittes,
driftmotion 67mm kit, profec b II, AEM EMS, aeromotive AFPR,
E85, 1350cc FIC injectors, dual aermotive stealth pumps.
My Build Thread--->
Re: Starting build #2 , I WANT 500 RWHP...
lookin good! Cant wait to see what you push out with the kit!
Re: Starting build #2 , I WANT 500 RWHP...
sweet build. how's this coming along? any progress since May 1st?
Re: Starting build #2 , I WANT 500 RWHP...
Back in May I just layed the engine in, nothing was really bolted together. I pulled the
engine back out and installed the Driftmotion exhaust manifold stud kit, full flow oil
cooler setup, shimmed the oil pump, finished rebuilding the transmission, mounted the
intercooler. Progress has been slow, but I'm really gonna step it up, I have a baby
girl on the way.
Parts I need to order:
-upgrade fuel pump from my 1 walbro
-upgrade injectors from 550's to 680's or 750's
-IS300 coils for COP setup
-new radiator w/electric fans
-catch can
400rwhp @ 14 psi, more to come w/ 25 psi...
CP's .020", Eagles, fidanza flywheel, Spec 3 clutch, clevittes,
driftmotion 67mm kit, profec b II, AEM EMS, aeromotive AFPR,
E85, 1350cc FIC injectors, dual aermotive stealth pumps.
My Build Thread--->
Re: Starting build #2 , I WANT 500 RWHP...
With a fresh engine like yours i would skip the catch can. I have about 2500 miles on mine and theres zero blowby. Nothing in the pcv or charge pipes.
+1 on getting the car done now, once that kid comes free time is out the door.lol
| 7MGE-T | Rebuilt Steel Center W58 | ACT HD 6-Puck | Ford Carrier Bearing | 3.73 LSD | DM DP | MBC @ 12PSI | Cone Filter | HKS D2 Sport Exhaust | Tien SS Coilovers | Energy Bushings | Brembo Rotors | EBC Redstuff | Goodridge Lines | ATE Super Blue |
[NA-T 7M][CenCalSupras]
WANTED:
-Aftermarket radiator
-3in Metallic Cat
-Better MBC
Re: Starting build #2 , I WANT 500 RWHP...
So just got my Mishimoto radiator, fan shroud w/electric fans,
IS300 coils, and dual stealth aeromotive in-tank pumps (thanks
for the idea Toyotanos) Here's a couple pictures.
400rwhp @ 14 psi, more to come w/ 25 psi...
CP's .020", Eagles, fidanza flywheel, Spec 3 clutch, clevittes,
driftmotion 67mm kit, profec b II, AEM EMS, aeromotive AFPR,
E85, 1350cc FIC injectors, dual aermotive stealth pumps.
My Build Thread--->
Re: Starting build #2 , I WANT 500 RWHP...
Very nice!
Subscribed!
Good to see another CO supra being built up. I'll be swapping in a 2j NA-T over the winter, and I'll be running the same turbo kit too lol.
If you havnt driven one, You wouldn't understand. You need a test drive....not mine though.
Re: Starting build #2 , I WANT 500 RWHP...
Got some AN fittings welded on my valve covers and intake pipe for my catch can. Just got my injectors and
SH!t load of braided hose, AN fittings, and fuel filters for the fuel setup.
400rwhp @ 14 psi, more to come w/ 25 psi...
CP's .020", Eagles, fidanza flywheel, Spec 3 clutch, clevittes,
driftmotion 67mm kit, profec b II, AEM EMS, aeromotive AFPR,
E85, 1350cc FIC injectors, dual aermotive stealth pumps.
My Build Thread--->
Posting Permissions
Reply With Quote
Bookmarks