Mr.Yuk's Swap/Build

**Mr.Yuk** · February 1st, 2011, 10:44 PM

Will be bringing supra into shop to begin hardcore work

**Mr.Yuk** · March 1st, 2011, 08:37 PM

Not much new to report. And a complete lack of pics for now...
Bought a Reman rack, Some Lowering Springs and new Monroes for all four corners. I guess Monroe (according to our info and rep) Has changed the valving in their import shocks and struts, so... for what they cost me, I decided to experiment. Guess they were developed with help of the SCCA, so... yeah. We shall see.

On a warmer day two weeks ago, drove the 'Sup to scratch the itch a bit, and swung out to Rob's and we installed a new clutch master cylinder. We meaning he got the annoying nut taken care of lol

Thats all for now. Will try to post pics of new parts soon.

**Mr.Yuk** · April 14th, 2011, 01:55 AM

Ok so.. After finding a bit of a fuel tank leak... tis been fixed.
so the tale of the tape reads as such thus far:
New Struts all around
Eibach lowering springs
New Rack
Re-Sealed oil pan
GTE fuel pump and such
Fixed leaky gas tank
New sway bar links
Brought hard-pipe to welder
Had a few Drinks
Negotiated trade for Wide-Band
Alignment to be done
Fixed broken wires

Hope to make it to the meet at Suprasport for the first time ever with the car and myself being there at the same time.
Hope.

**toyotanos** · April 14th, 2011, 08:42 AM

Woo AND Hoo! Id check your alignment adjustments prior to bringing in for an alignment...all of mine were seized x.x

**Mr.Yuk** · April 14th, 2011, 10:20 AM

Shouldn't be an issue Mr. Steve, remember, my car has already been aligned

**leecheater** · April 14th, 2011, 11:07 PM

Drew, Sounds like significant progress. If you need to put her up on the hoist, give me a text. I am still not sure if I am going on Saturday. If I do, it will be with the BMW. Supra is almost ready to rock though.

**toyotanos** · April 14th, 2011, 11:13 PM

Originally Posted by Mr.Yuk

Shouldn't be an issue Mr. Steve, remember, my car has already been aligned

Well herr de derr :P
Sounds like I'm the only one who has to deal with rust here in Minnesota ...on my Cali car x_x

***funky_monkey58*** · April 14th, 2011, 11:52 PM

Originally Posted by toyotanos

Well herr de derr :P
Sounds like I'm the only one who has to deal with rust here in Minnesota ...on my Cali car x_x

You could remedy that for $1500.....

**Mr.Yuk** · April 21st, 2011, 12:17 AM

Originally Posted by toyotanos

Well herr de derr :P
Sounds like I'm the only one who has to deal with rust here in Minnesota ...on my Cali car x_x

I am just really blessed with the fact that my pops is GREAT with front end work.
Thanks for the offer Dan, but looks like everything should be fine for now.
Now when I get her back... then comes putting in all the "new" I/C bits and Sean's wideband