New product available. Adjustable rear control arms.

[wesbeech]

Custom made tubular rear control arms for the mx83 Cressida. Also available for the mk3 supra.

These custom made arms are fully adjustable. They use heavy duty heim joints rated for 22,000 pound of force. The tube is heavy duty DOM steel tube. The u bent brackets are made out of 3/16” steel. We use custom made and machined parts meant specifically for these arms. No parts are modified or adapted to be used. All the parts are made for one thing and one only these control arms. We do not use reducer bushing like other company have to try to cut down on cost. These are fully TIG welded by an aircraft and top fuel bike fabricator. We also have rosette welded the ends for extra strength and safety. These are a must for lowered or track cars. No matter how much you lower the car or what you do. With the adjustably of these you will be able to get your car back into spec. They are much stronger and beefier than factory they will not fail like others do.

The price is $200.00 for each one plus shipping.
1. Control arm
2. Toe arm
3. Traction arm

Thanks for stopping by and checking out the new product.

Here are the pictures of the arms. The Cressida arms are pictured. I will get pictures of the supra one soon they are very similar

[supraguru05]

I was wondering when you were going to list these for sale. Could you please tell me the shortest and longest length as well as the thread pitch for the camber link.

[empera]

damn wes they look great....hopefully i'll be able to grab a set in the near future.

[IJ.]

Would it be possible to offer Poly Rod ends as an option for the purely street Supras?
(quieter and better longevity in a DD car)

[wesbeech]

I was wondering when you were going to list these for sale. Could you please tell me the shortest and longest length as well as the thread pitch for the camber link.

From stock you have + and - about a 1/4" each way on all e arms and the front toe arm has an extra + and - 1/4" cause it has 2 heim joints. The big joints are 16 TPI and the small ones are 18 TPI

Would it be possible to offer Poly Rod ends as an option for the purely street Supras?
(quieter and better longevity in a DD car)

Maybe when i get some time ill look into them to see how much redesign will be needed. Im sure it will cost a bit more but ill look int it.

[supra90turbo]

That would be well worth the extra money for the poly rod ends! Good find, Ian!

Damn... If I didn't have the A-1 arms already....

[IJ.]

Yep used Heim joints in road cars in the past and HATED them and that was in noisy rattly cars to begin with not Smooth Quiet LuxoBarges like a Mk3

[supraguru05]

That would be well worth the extra money for the poly rod ends! Good find, Ian!

Damn... If I didn't have the A-1 arms already....

sell them and buy these. In all seriousness the A1 arms are swedged steel which is prone to cracking. These arms are the simplest replacement arms. Only issue is since its a larger diameter tube on the traction arm tire clearance could be an issue for some people.

[supra90turbo]

Better made, made by a supramania member, cheaper, hmm...

Anyone want a set of A1 arms? I'll trade straight up for these

Are these powdercoated or painted? Do we have a choice of color?

[wesbeech]

Better made, made by a supramania member, cheaper, hmm...

Anyone want a set of A1 arms? I'll trade straight up for these

Are these powdercoated or painted? Do we have a choice of color?

Powder coated. They come blue but for the extra cost of the powder i could do a diffrent color.

---------- Post added at 02:31 PM ---------- Previous post was at 02:30 PM ----------

sell them and buy these. In all seriousness the A1 arms are swedged steel which is prone to cracking. These arms are the simplest replacement arms. Only issue is since its a larger diameter tube on the traction arm tire clearance could be an issue for some people.

They are 1 1/4" od so they are not a ton bigger