Vacuum line routing - 2JZ-GE

[Satan]

On our 94 N/A, we took the Intake Manifold off and replaced everything back on as we thought it was supposed to be. Still sounds like we missed a vacuum line and I can't see where I may have missed it either.

Car still runs fine, but I would still l ike to see a good detailed pic as well and re-verify everything. Maybe someone's pulled the engine and can take a few snapshots of what the lines/rouing looks like on the back side of the IM.

If you have a link to a detailed diagram that would be great too.

Send me the pics and I can even host 'em... g099521@yahoo.com


Much appreciated!

[Satan]

I think the ones which are connected are going to the right places, but am not sure. I did find 2 ports which are open (red arrows below), but it looks like the one on the right, is the one which may have had a line on it (clean tip). I do not have any lose/unconnected lines and did not pull any out.

A few detailed pics like these would help. Unfortunately, I was using my iPhone, not much light, etc.