+ Reply to Thread
Page 1 of 2
1 2 LastLast
Results 1 to 10 of 14

Thread: Exhaust Comparison Thread

  1. #1
    Junior Member
    Yotaholic's Avatar
    Join Date
    Apr 2007
    Location
    Nfld.Canada
    Posts
    110

    Exhaust Comparison Thread

    I was looking around hoping to find a thread comparing the different exhaust systems available for the 1J/2J with sound clips or before and after dyno graphs. I couldn't find one Lots of vids but not a breakdown of what was on the cars.
    So I had an idea for a thread ( actually I read an old thread where 1JArpus mentioned it as well ) Hope you guys will contribute for a good cause. I think the members that are looking for an exhaust system but not sure what to buy will find it very helpful. Cat restrictions , mufflers, y pipes, egt's ,,, exhaust does more than sound loud or quiet ,, let's find out what flows the best and what advantages paying the big bucks really has .. Dyno graphs with different systems on the same car would also be good to see.

    Please list what you have followed by a supporting Sound clip, short vid and or a before and after dyno graph .

    I'll start

    1JZ
    2J USDM cams
    HKS manifolds
    HKS T3G Twins
    HKS Y pipe
    Raptor Racing 3" SS
    w/o Cat
    Magnaflow 14815

    I just installed an Emanage Ultimate and 650's. It's not running great but i'm workin on it .Please excuse the black smoke and 5K shifts
    Exhaust+Vid+1JZ++
    Last edited by Yotaholic; 07-11-2009 at 08:19 AM.
    89 MKIII 7MGTE unmolested
    82 MKII 1JZ 451RWHP/390TQ
    R154/Spec Stage3+/Raptor Racing 3" ss Exhaust/HKS Y pipe/ 14815 Magnaflow / Godspeed 24x12x3.5" IC/ Apexi Bov/Intake/ Emanage Ultimate/ Profec B spec II EBC / Bosch FP/ Mines Ecu /HKS T3G kit / AEM Meth injection/ usdm 2J cams. Sard 650's/ Titan adj cam gears/ HKSguages/Aem Uego/Flexalite fans/LJM strut bar/ SS brake /clutch lines/KYB AGX's/Dobi 's /Centerline Thrusters /custom DS/ blah blah blah

  2. #2
    Supramania Regular
    Turbo Drifter's Avatar
    Join Date
    Dec 2005
    Location
    Surrey, BC Canada
    Posts
    536

    Re: Exhaust Comparison Thread

    Car sounds nice, love the sound of a 1jz.

    My set up is 2jz with CP pistons
    HKS 264's
    ebay manifold
    DBB T67
    4" down pipe split to twin 3" after the tranny 4 3" resonators.

    In this vid I had the AEM and no cams.

    http://www.youtube.com/watch?v=u1pYXUOoLFo

    This one is with the HKS 264's and AEM still. (The camera I was using sucked)

    http://www.youtube.com/watch?v=QtdLgHbBZbk

    This is at the track last month with the ViPEC the rest of the set up is the same. (need to turn this up the GoPRo makes it quiet.

    http://www.youtube.com/watch?v=QAtrGO3p7sY

    Jeremy
    Its a car.......ya know 4 wheels and a moron behind the wheel.

    89 MKIII 2jz......hard parked fo life! SOLD! You will be missed...

  3. #3
    Junior Member
    Yotaholic's Avatar
    Join Date
    Apr 2007
    Location
    Nfld.Canada
    Posts
    110

    Re: Exhaust Comparison Thread

    Quote Originally Posted by Turbo Drifter View Post
    Car sounds nice, love the sound of a 1jz.

    My set up is 2jz with CP pistons
    HKS 264's
    ebay manifold
    DBB T67
    4" down pipe split to twin 3" after the tranny 4 3" resonators.

    Jeremy
    Thanks Jeremy . Damn man you launch hard !! Kicked the cd right out of the deck on that first one LOL Sounds great especially with that rear camera view . Makes me wish we had a track around here

    Anyone else care to share ??
    89 MKIII 7MGTE unmolested
    82 MKII 1JZ 451RWHP/390TQ
    R154/Spec Stage3+/Raptor Racing 3" ss Exhaust/HKS Y pipe/ 14815 Magnaflow / Godspeed 24x12x3.5" IC/ Apexi Bov/Intake/ Emanage Ultimate/ Profec B spec II EBC / Bosch FP/ Mines Ecu /HKS T3G kit / AEM Meth injection/ usdm 2J cams. Sard 650's/ Titan adj cam gears/ HKSguages/Aem Uego/Flexalite fans/LJM strut bar/ SS brake /clutch lines/KYB AGX's/Dobi 's /Centerline Thrusters /custom DS/ blah blah blah

  4. #4
    86.5 1JZ Single Turbo
    Bigzavs's Avatar
    Join Date
    Apr 2005
    Location
    Arlington, TX
    Posts
    1,836

    Re: Exhaust Comparison Thread

    1.5JZ
    272's (old 268's in video)
    Ported head
    T88-34D
    4" downpipe, 4" exhaust

    http://www.youtube.com/watch?v=gkXyIH9ES_I

    no fun videos yet
    DFWSupras - Bigzavs

    86.5 1C6 Targa 1.5JZ
    T88-34D/1000cc's/AEM EMS/E85
    Crower 272's/Ported Head
    T56 6-speed/Centerforce DF clutch

    If you have five dollars and Chuck Norris has five dollars, Chuck Norris has more money than you.

  5. #5
    Regular Member
    gonzy tunning's Avatar
    Join Date
    Dec 2006
    Location
    new jersey
    Posts
    306

    Re: Exhaust Comparison Thread

    i'll post my later

  6. #6
    LADA is my daily
    Pernilongo's Avatar
    Join Date
    Jul 2007
    Location
    Los Angeles
    Posts
    457

    Re: Exhaust Comparison Thread

    1jz vvti
    3" DP
    2 vibrant ultra-quiet resonators


  7. #7
    Junior Member
    Yotaholic's Avatar
    Join Date
    Apr 2007
    Location
    Nfld.Canada
    Posts
    110

    Re: Exhaust Comparison Thread

    Quote Originally Posted by Bigzavs View Post
    1.5JZ
    272's (old 268's in video)
    Ported head
    T88-34D
    4" downpipe, 4" exhaust

    http://www.youtube.com/watch?v=gkXyIH9ES_I

    no fun videos yet
    I'm glad I had the sub hooked up to the puter when I hit that link . Man that sounds like a Monster ,, get some fun vids asap Thanks for posting !!


    Perni ,,,, sounds good man ! vvti
    89 MKIII 7MGTE unmolested
    82 MKII 1JZ 451RWHP/390TQ
    R154/Spec Stage3+/Raptor Racing 3" ss Exhaust/HKS Y pipe/ 14815 Magnaflow / Godspeed 24x12x3.5" IC/ Apexi Bov/Intake/ Emanage Ultimate/ Profec B spec II EBC / Bosch FP/ Mines Ecu /HKS T3G kit / AEM Meth injection/ usdm 2J cams. Sard 650's/ Titan adj cam gears/ HKSguages/Aem Uego/Flexalite fans/LJM strut bar/ SS brake /clutch lines/KYB AGX's/Dobi 's /Centerline Thrusters /custom DS/ blah blah blah

  8. #8
    Supramania Regular
    Turbo Drifter's Avatar
    Join Date
    Dec 2005
    Location
    Surrey, BC Canada
    Posts
    536

    Re: Exhaust Comparison Thread

    Nice tach Bigzavs, not many people will pick it out or know what its from but nice, I have the same one.
    Its a car.......ya know 4 wheels and a moron behind the wheel.

    89 MKIII 2jz......hard parked fo life! SOLD! You will be missed...

  9. #9
    Ninja Editor 'Since 05'
    tlo86's Avatar
    Join Date
    Jul 2005
    Location
    Colorado
    Posts
    3,602

    Re: Exhaust Comparison Thread



    2jz, from inside with hks super dragger, TMS high flow cat, and 3'' downpipe off my single turbo (turbonetics cast manifold). despite what my vid says its to redline my waste gate added its own sound when on the road this was just parked... loved the sound though. i liked ron's exhaust setup on his 2j i just can never find his build thread
    Quote Originally Posted by IJ. View Post
    Diagnosing a problem should start with "What have I fucked with and is it connected to the problem"
    Back in the JZ game - 93' GS300

  10. #10
    Regular Member
    radiod's Avatar
    Join Date
    Dec 2007
    Location
    Abbotsford, BC
    Posts
    413

    Re: Exhaust Comparison Thread

    7M GTE
    Stock Manifold
    BIC divorced downpipe
    3.5" SS exhaust, no cats
    Apexi N1 Muffler 3.5" in 4.5" out

    Don't have any videos unfortunately and can't post any due to car being dead, but I'll just say it purrs like a kitten at idle and roars like a lion when you're boosting
    1989 Supra Turbo Targa

    It's a love hate relationship.

    Project head swap

    Quote Originally Posted by Doward
    Come to a stop. Rev in neutral to about 4k rpm, and drop the clutch. Hold the accelerator to the floor for a moment, and let off.. See if you left one or two stripes.

    It's like a pregnancy test, really.

+ Reply to Thread

Similar Threads

  1. Exhaust Comparison
    By Fubar231 in forum 7M-GTE Engine Technical Discussion
    Replies: 23
    Last Post: 08-20-2008, 10:35 AM
  2. Exhaust setup thread.
    By Ma70.Ent in forum 7M-GE Engine Technical Discussion
    Replies: 14
    Last Post: 06-09-2008, 10:58 PM
  3. stripped thread on the exhaust side on the head
    By mbargetzi in forum 7M-GTE Engine Technical Discussion
    Replies: 3
    Last Post: 04-28-2007, 03:16 PM
  4. 7M exhaust manifold thread
    By SD2JZA70 in forum 7M-GTE Engine Technical Discussion
    Replies: 33
    Last Post: 01-31-2007, 02:15 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts