Click here for the website.
Sticky Threads
Check out the sweet 1JZ install they did on my car. I wouldn't let anyone else touch my car. BTW, everything in my car works... all gauges, A/C, power steering, etc. The A/C is the best part! I love when others with 1jz swaps point to my condensor fan and ask what that is? :biglaugh: :biglaugh:...
Just an FYI: We do upgrades and rebuilds on MR2 CT26's, 2JZ US and JDM twins, CT15's from VVTi 1JZ's, aftermarket and stock turbos from HKS, Garrett, Greddy, Holset, Comp, Master Power, SPA, etc... We will do free disassembly and inspection for a price quote to repair any turbo you want fixed or...
This is what the top of the hose looks like, I forgot to put the lower adaptor on it for the pic, but it will be included, so it will go directly from the hardline to the fuel rail. These will be $65, and are in stock now. ...
These are cast stainless 2-hole 3" flanges. They willl work with any 3" aftermarket exhaust system with 2-hole flanges. They can be mig welded to stainless, mild steel, or aluminized steel piping. They are machined to be very flat on the gasket surface. $16.50 ea! (gaskets not included) ...
I just fixed 4 ecu's this week alone, with caps leaking on the pc board, and since the electrolyte is acidic, it ate through the traces on some of the boards causing major problems. I am going to start offering a repair service for them, it's really becomming a big problem for a lot of people. It...
We offer a CT26 upgrade service. The cost is $510 for a full rebuild and upgrade to a 50, 54, 57, or 60 trim. The turbo is balanced before the final assembly. We do not do 60-1 upgrades because of reliability issues, not because we can't, but because we don't recommend it. You can make well over...
We are now offering upgrades/rebuilds on VVTi 1JZ single turbos! We are the only place you will see offering this anywhere. We replace the ceramic exhaust wheel with a new steel wheel so high boost will not be a problem, and we bore the housing and install a new 20G compressor wheel! This upgrade...
Driftmotion is now having clutches made to order for us by Action Clutch. These are rated at 2800lbs, and with the 6 puck disk it will handle ~500whp. A 40% increase in torque capacity with the upgraded pressure plate and a stock Toyota disk, and a 70% increase over stock with the upgraded...
We have 4 sets of black, 3 sets of red, and two sets of blue Samco brand hoses in stock. These will fit an MK3 with a 1jz, 2jz, or a 7m. $105 a set, your choice of color. These are available on the website at www.driftmotion.com ...
From the people who brought you the Freddy bov and the Spearco replica intercooler, comes a new wave of automotive performance....... Samco Style radiator hoses $65 a set! http://img.photobucket.com/albums/v379/BigAaron/driftmotion/spamco1.jpg...
I'm not taking credit for this mod, but I'm going to make it available because I think it's a nice upgrade. Mine uses a 45 deg with a swivel so it always fits purfect and is easy to install. It will be assembled and ready to put on the engine, the AN adaptors for the block and the pump are...
We are growing as a business, which means I can't spend as much time on SM as I used to. That doesn't mean you will not get the same level of service. I answer my phone from 10am until late in the evening, and I respond to emails and pm's several times a day. Posts requesting order status in our...
It's going to be $65. It will improve fuel flow for people making increased horsepower using a Walbro or MK4 fuel pump at higher fuel pressures then stock. This goes great with my Aeromotive AFPR kit. http://img.photobucket.com/albums/v379/BigAaron/driftmotion/SANY0895Medium.jpg ...
http://img.photobucket.com/albums/v379/BigAaron/driftmotion/1jzpshose.jpg
Full length clutch hose, for 5 speed swaps or replacement of old stock hose. It goes directly from the clutch master cyl right to the slave cyl. Eliminates the need for the factory hardlines at the top and bottom. This hose is stainless braided with a clear outer jacket to prevent scratching on...
7/16 exhaust stud repair/upgrade kits! Kit includes: 1) 7/16 helicoil kit 8) helicoils (one extra just in case: murphy's law) 7) studs 7) metal lock nuts 1) 29/64 drill bit (standard length) 1) tap holder tool
Normal Threads
What's up Aaron, have you ever thought about a App for the App store for the IPhone so we can place purchases and look at parts? Would be cool to browse Supra parts like that rather than using the browser which requires zooming in and out. Something similar to the Tapatalk app for the IPhone to...
With the current market for building leases being what it is, it was a great time to move into a little better place, and we found one only a few blocks south of the old shop! This one has a nice little showroom and an office, 20' ceilings, and it's right on the street. We are the first tenants in...
hi, i purchased your 1jz fuel rail around feb it is the 2nd version i believe, on your site it is advertised as having a 3/8 NPT center outlet. i ordered a 3/8 NPT to -6 AN union from jegs so i can hook the rail up to my aeromotive a1000 regulator. the hole on the rail definitely isn't a 3/8 NPT...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules
