Forum: Supra Racing/Dyno

As the title says, has anyone done this without NOS? I don't remember ever seeing anyone do this. I've searched a couple of times but no luck. I have a full weight car with interior and bolt on 60-1 turbo and going to try and do this when I get some new tires and the tracks open back up!

Here is the video: http://www.youtube.com/watch?v=tTil7pM1lYQ 10 psi==> 333hp/339tq 14 psi==> 371hp/395tq Hitting 399hp/414tq just before hitting fuel cut @ 15psi :3d_frown: Not tuned yet!

I have an 87 turbo supra with the good ole' 7m and have really been wondering, what steps should i take for a good strong 12 second pass? I know a twelve doesn't sound like much but that will be a strong time for a street car. Oh and here are the things i will not do to achieve this time, will not...

So my friends smart phone has a accelerometer on it and it calculates the horsepower of a car I think it is decently accurate it said I have 270 hp to the wheels and 396 lbs of torque my mods are a rebuilt 7mgte with 20 over pistons an k and n intake a downpipe and hks dagger no cats Anyone...

Well it is time next Friday the 30th of July at 10am I will be putting my Supra on the dyno for its first time. 1JZ with stock cams Megasquirt 2 650cc injectors Holset HE351VE @ 21psi 65lbs/min And much more mods that could affect the outcome of this. I will be posting the dyno graph in...

UPDATED VIDEO 1-21-10 Well, finally got the time to hit the dyno.This is my supra with a Fresh Engine Ct26-60 trim , k&n intake , Bic DDp, catless 3 in, 2.5 hard pipes, Big front mount,Walbro 255 hp, 550s, Aeromotive AFPR, HKs 2mm MHG, arp HEad studs, ngk wires, MAFt pro speed and density...

I took my car to the dyno last night and my car is done. The only positive result of the evening is that I did develop 300HP at only 8psi. Unfortunately this would be the high of the evening. Car developed massive rod knock and failed all together. Here's the Dyno sheet. It just seemed...

hey guys, i'm currently installing my dbb gt35r on my 7mgte. wondering if anyone else has this turbo or a dyno sheet so i can get an idea of what kind of power to expect? did alot of searching and can find quite a bit for a 1/2jz but nothing for the 7m. thanks! Travis

sup guys...well finally got the time 2 take my car to the dyno and get it tune.....well my car consist on a 1989 2jz supra here is the list of upgrades on my car LIST 2JZGTE SINGLE PT71 GTS-H BILLET TURBO TAIL 44 WASTEGATE EBAY TURBO MANIFOLD...FULL 3 INCH INTERCOOLER PIPING AND 4 ROW...

OK final number is 602whp/550wtq !!! The impresive thing is the power under the curve... You can make peak numbers all day long and run slow on the track and the street that turbo is outstanding steet turbo for this engine ...

Went to the track on sat and ran a 10.67 @132 ! More to come time to ditch the stock head and cams! And its a 5spd car not auto. Mods are 72mm turbo 3'' intercooler piping Equal length tubular manifold Tial 40mm gate Pro Efi Ecu

Thanks Bill! http://idriders.com/Supras/gbuild/P1000220.JPG 24psi on pump with water / meth. To go with the new dyno numbers, I've also got some new 1/4 mile numbers, that I'm still absolutely flabbergasted about. I'm car number 4056 on the left! :D ...

after redoing the exterior on my car I did a little power upgrades as well, big front mount ,hard pipes 2.5 hot side 3” cold side,driftmotion 57trim,ddp down pipe,560 denso injectors. My boost controller took a crap and would not go past 14psi so all I could do was pull a little fuel Before my...

-------------------------------------------------------------------------------- We played with the No2 and got it working perfect with the rpm switches. Still no big gains on the top end, still only 148 mph. Thats with a 75 hit and also w/ a 150 hit. We'll tighten up on the converter and go up...

Well i went to the dyno today and got some pretty good results, Made 478hp and 503 lbft at 21 pounds on VP110. We where going to do a 25psi pull but had some problems with the boost controller. I think we could have been well into the 500's with a few more pounds of boost. I think i am happy with...