Discuss everything relating to the MKIII that isn't technical engine talk.
Sticky Threads
5-4-09 I have been getting many PM's recently regarding wheel fitment. Can you all please just ask the questions in here? This is a very much active thread and all questions should be answered in a reasonable amount of time. I have been seeing alot of wheel fitment threads on here recentley. So...
Here are links to the local news report: http://www.southwesternontario.ctv.ca/news.php?id=7876 http://www.wrps.on.ca/mediacentre/Major_Incident_Summaries.htm#10-160705 http://news.therecord.com/article/755745
Please skip ahead to post #163 for updated information. We are having clutches made for us by Action Clutch. They make us an upgraded pressure plate that is 40% heavier spring pressure then stock. Recently, someone brought to my attention the they could buy the "same thing" on Ebay for over...
http://members.shaw.ca/dsm.1000q/Engineprimer/1G/index.htm I absolutely love this site for DSM's and was thinking... why dont we do something like this for the MkIII ? It wouldnt be hard, it would just take some time .. and in the end, every noob question could be simply answered with a link to...
Ok guys, I just remembered that we had this before the hack... Its a list of every one that feels they can contribute to helping a fellow supra owner who breaks down in thier neck of the woods, driving supra or not. This list is only to have your information on it. DO NOT START POSTING CRAP...
Think you're getting a screaming deal on that Walbro fuel pump you've always wanted? It's probably a China knock-off: http://www.fuel-pumps.net/walbro-forgeries.html Do you want a knock-off pump that hasn't been through the level of R+D and testing that a genuine Walbro has? Another reason...
Dealing with the "oldschool" guys (or: How to ask smart questions..) Introduction In the world of import automotive high performance, the kind of answers you get to your technical questions depends as much (or more) on the way you ask the questions as it does on the difficulty of developing...
TECHNICAL INFORMATION SITES/PARTS/ etc... Information on Packing and Shipping Parts TSRM - for the mk3 supra TSRM, click the second link down. ("TSRM MKIII SUPRA") Lexus/550 Upgrade Dr. Jonez's-7M swap info!!! sites, incredible amounts of useful information: www.mkiiitech.com and...
Recently the topic of censorship & content moderation has been a hot button item around here. The following is the OFFICIAL SupraMania! policy on the matter: The Off Topic section of this website is, and always has been, "enter at your own risk". This is the only section of this website with...
Normal Threads
Hello, due to our cars age and IJ accident I have decided to reinforce my toe arms. The idea is to wrap it in 1mm steel according to the pictures. It will reach about 10cm from the bushing housing. It will look like this, but on both sides: (dimensions are not correct this is just to get an...
Hello, yesterday I looked where I could place my cooler... Hopefully my supra will be out soon, but with some shortcuts, for example I won't build a new exhaust now, no replacing of IC pipes or IC. The new oil system is already started and I won't put back anything of the stock system except...
Don't ever buy critical parts from a shady eBay seller, but Im sure you all know that by now:icon_bigg
Whats the factory diference to lower a 88 tems to 89-up specs. Also is the tems any good or just take it off thanks.
so im driving down the road in my 89 5speed turbo and not even touching the breaks and the front tires lock up. any sugestions? ive replaced the calipers pads hoses lines and even tried the abs but still does it.
Dont flame me, but this discussion came up between a few friends and I. Is it possible? or has it been done before?
Alright... now I'm pissed. We've (myself and Don - D7MSupra) been fighting with this one damn bolt on the back of the turbo to the exhaust pipe, and it's the only thing holding us back to finishing this up. It's the lower right bolt (looking at the turbo from the front of the car...) that along...
I recently got my intercooler for the 1j. it is hitting the support for the latch and horns unless i put it in at an angle like stock. I would like to see some pictures of how others have mounted theirs. I suppose it dosen't matter either 7m with a ffim or a 1/2jz. I just want to see if people are...
:1zhelp: I NEED HELP! I bought an 86.5 Supra with the 7mge n/a and it needed A tranny. So I bought one out of a 1991 Turbo 7mge (automatic) and everything Swapped out fine.. so Everything is Together and The starter won't turn over...? What did I do Wrong Or what Do I need To Check...? Thanks to...
OK so within the last week my car has been acting up. When cold, the car Starts up fine. When the brakes are hit there is no dimming of the lights and radio. acts normal. Its when its warm when it starts to act up. When I hit the brakes the lights dim bad and my radio cuts out completely. If...
I have a extra set of front lower control arms I am thinking about lightening by making them swiss cheese (drilling lots of holes in them to remove metal). Anyone have any words of wisdom on the safety of this? The lower control arms seem to be over-engineered with their mass and weight.
hey guys ive searched and looked around and i was just wondering if the fuse that runs the power windows also runs the guages on the dash all of my stuff doesnt work and i have looked for the fuse box just couldnt find it i looked under the kick panel on the drivers side like the manuel told me...
Since I have a few extra 2JZ's around as some of you may know I thought I would post up some pics for anyone that has ever wondered what the baffles look like on the inside.
Post up pics of your pre 89 bumper. here's mine it's a shity pic from my phone but I'll get better pics up soon.I took out my fog lights and my grill and than the extra plastic thats on there I dremeled.I also re painted my stock lip with bumper coating. ...
Hey guys just wondering if anyone has pics of recaro seats from an evo in their supra or has anyone ever done this or knows how easy or hard it is to integrate? Cause a friend of mine wants to sell me a set for a really good price. I know it will spruce up my interior and i'm all about...
Just put the motor in. 1987 toyota supra, turbo. Turbo harness and ECU. I have no electrical power what-so-ever anywere. -1 year old battery, charged. Hooked up my DMM to it and getting 12.86~ V. -Fusable link is good -Battery cables are good Im hungover, clueless, and just want the car...
pulled out the fuel pump from my 90 supra, it has a 1j in it. the fuel pump is a denso 195130-0172. is this fuel pump good enough to use with the 1j? it look alot bigger than the walbro i took out of my 87.
someone that knows and cares about supras, not some 16 yearold first cheap car dick. http://newhaven.craigslist.org/cto/1872604028.html hopefully they forgot a 1 or a 0 or something..
Well i had my guage cluster out of the car and the clear plastic shield was off of it. My friend decieded to fuck with my cluster and he gave me a full tank of gas, at 160mph, at 8500rpm :: angry ::. Well low and behold my guages are fucked up when the are in. I put a full tank of gas in and put...
i been having a problem with my windows for a while now. the windows would work randomly all summer long. About mid summer the passenger side window completly stopped working. it wouldnt go up. I took off panel put power to motor and it went up. so im guessing motors good. the driver side still...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules
