|
|
MA70Snowman 09-18-2009 02:57 PM
With the recent surface of some topics regarding E-fans, and the Tari (Thats plural Tarus) Fan, I had been asked to do a write up from a couple members on my install. So here we Go:
BASIC INFORMATION REGARDING THE E-FANS:
Flow Ratings:
~2800 CFM Low
~3800-4200 CFM High
AMP Draw:
130...
18 Comments
Supracentral 09-16-2009 05:52 PM
This will allow you re-wire your 1987 MKIII Supra so that you can throw away your lamp failure box which causes your brake lights to not work if it goes bad.
If the light on your dash that looks like your car is farting comes on, it means there is a problem with one or more of your lights in the...
Supracentral 05-30-2009 10:45 AM
Fuel cut is the ECU saying:
"The AFM is giving me a signal that is outside the acceptable range for the current RPM, intake temperature, coolant temperature and TPS value. In other words I've run out of fuel map and don't know how much fuel to supply the injectors."
As a safety measure,...
1 Comments
JASONA70 09-24-2008 12:16 AM
THIS IS FOR THE 1JZ-GTE SUPRA ECU
1 Comments
sammydafish 11-12-2007 11:37 AM
I just realized this wasn't posted here. I started putting together this list as I started building my car quite a few years ago. The concept is to figure out what's worth removing and what's not. The list is pretty complete containing most things that someone might try to remove from their car....
SupraOfDoom 03-03-2007 10:10 PM
I'm sick of seeing replica's and seeing tons of questions about getting all these misc parts, so I'm here to show people where to get originals and support companies who make their own products.
Regulus:
http://members.jcom.home.ne.jp/regulus-pro/
Kaze:...
arz 01-10-2007 09:22 PM
INSTALLATION INSTRUCTIONS FOR SUPRA MKIII 13 INCH WILWOOD FRONT BRAKE KIT.
When you receive your kit open it to inspect the contents of the kit. In the inside the main box you should find two boxes, inside the top box you should have 3 Wilwood boxes, 2 Caliper boxes and 1 Brake Pad box. Each...
2 Comments
shaeff 04-19-2005 05:45 PM
origionally posted by mdcmotorsports:
Ok, so since I just went through this with another member here at 3am online, I figured I would do a little write up on this subject.
If you are doing a head gasket change, DO IT RIGHT! The following is a list of pretty much EVERY THING that you should...
1 Comments
|
|
|
All times are GMT -5. The time now is 03:57 AM.