Credit for this goes to Mark3 for this guide. Firstly jack car and as always support with axle stands, don't risk your legs for a few little rubber seals.... the lower wishbone is the bit to remove, the n/s one looks like this; its held onto the suspension members via the shock absorber...
1 Comments

- Comments

This section is for techtips and FAQ's. This is not the section to ask general questions. If you have a relevant tech tip or how to, post it up. If you have questions, post them in the appropriate section, not here.

I am going to start getting my supra ready for paint soon and had some questions 1: Do I need to take it all the way down to the metal of just down to the base coat? Or can I just sand the paint that’s on there now and put then new paint over it? 2: What rpm orbital sander should I get and...
17 Comments

Originally posted by ma71supraturbo on SF, thought it might be useful to have it here, where it's easier to find. Has been edited slightly :) Profec A install write-up This install would have been a breeze if I had just known a few key things missing in the instructions. And because the...
2 Comments