Well replacing the oil pump shaft bearings was the last step in my rebuild before assembly, and I was kind of at a loss with how to easily change them and make sure they went in perfectly strait as well as make sure the oil hole is lined up. If you don't do either of these two things you will have...

This thread is intended to answer basic questions about the lighting set-up in the MKIII. I have completed the gauge lighting and climate control using LED's and a PWM dimmer. The first two posts will be continually updated as I complete all my lighting throughout the car. Gauge Cluster...
92 Comments

I am rebuilding my leaking CPS. This is a work in progress, but I thought I would record it since this is a pretty common problem on our cars. First thing I did was buy a new gear set (4 week special order from Japan). This is optional, but makes things easier since you don't need to be as...
13 Comments

Wasnt sure if something I had was NA or turbo. So I just put the part number in and it came up with a sufficient amount of info. Also can look for the part number. https://www.1sttoyotaparts.com/partscat.html P.S. If somone already posted something similar just delete I searched and didnt...

Well guys, here is what I found out: My cable was broken a long time ago. Im talking about the long, 2-piece cable for turbo 5 speed Supras. I decided to start ordering the parts to fix it when I came upon a discovery. I ordered a cable ($7.91 p/n ATP-Y-844) from RockAuto.com, thinking it was...
1 Comments

this data is from the RC engineering website. it includes formulas for calculating injector sizes for your application, as well as how to convert lbs/hr to cc/min and so forth. http://www.rceng.com/technical.htm -shaeff
1 Comments

As I know some, people don't venture into all sections; there was a thread in the technical section about CT upgrades. And since no one had responded I replied with what knowledge I have gained from countless hours researching the CT upgrades: 50 trim: Said to be most reliable all though I have...
9 Comments

Thanks to northsupra for the writeup!