|
|
Supracentral 09-16-2009 05:52 PM
This will allow you re-wire your 1987 MKIII Supra so that you can throw away your lamp failure box which causes your brake lights to not work if it goes bad.
If the light on your dash that looks like your car is farting comes on, it means there is a problem with one or more of your lights in the...
Supracentral 07-10-2009 01:16 PM
The great fuel filter myth.
Written by Jim Hopkins, Toyota Tech Adviser
Feb 08, 2004 at 04:00 AM
When Toyota Engineers first developed their electronic fuel injection (EFI), they were searching for a maintenance free, self regulating fuel system that would continually maintain itself in...
2 Comments
Supracentral 06-04-2009 04:39 PM
7M-GTE SPECIFICATIONS
ENGINE
Valve Clearance (engine cold), mm (in.):
Intake 0.15 - 0.25 (0.006 - 0.010)
Exhaust 0.20 - 0.30 (0.008 - 0.012)
Spark Plug Type:
NIPPONDENSO PQ20R-P8
Supracentral 06-04-2009 04:36 PM
The 7M-GTE was an ultra high-performance engine used by Toyota in the late 1980's and early 1990's. It is part of the series of Toyota M engines. In the US, only one Toyota ever featured this engine: the Toyota Supra. This engine was incredibly advanced for its time. The 7M-GTE was simply a turbo...
Supracentral 06-04-2009 04:31 PM
7M-GE SPECIFICATIONS
ENGINE
Valve Clearance (engine cold), mm (in.):
Intake 0.15 - 0.25 (0.006 - 0.010)
Exhaust 0.20 - 0.30 (0.008 - 0.012)
Spark Plug Type:
NIPPONDENSO PQ16R
Supracentral 06-04-2009 04:29 PM
The 7M-GE is a high-performance engine used by Toyota in the 1980's and early 1990's. They are part of the series of Toyota M engines. In the US, only two Toyotas ever featured the engine: the Toyota Cressida and Toyota Supra. This engine was very advanced for its time. The 7M-GE came standard with...
Supracentral 06-04-2009 04:23 PM
Here are the stock and ported flow numbers of a 7MGE/GTE cylinder head.
Stock:
Intake lift|Intake flow|Exhaust lift|Exhaust Flow
.100|77.4 cfm|.100|60.4 cfm
.150|113.9 cfm|.150|93 cfm
.200|141.4 cfm|.200|112.9 cfm
.250|162.8 cfm|.250|123.2 cfm
.300|176 cfm|.300|127.8 cfm
1 Comments
Supracentral 06-04-2009 04:16 PM
The culmination of fifteen years of development and the production of over 400,000 dual-overhead-cam engines, the 5M-GE engine was introduced in 1982 with 145 horsepower but quickly gained efficiency and power. It was known for instant response, thanks to computer-controlled electronic fuel...
|
|
|
All times are GMT -5. The time now is 04:26 AM.