Noob Question About Downpipe.

[smokemyocum]

Im A Noob On Having A Turbo Car This Would Be My First. The Guy That I Bought MK3 Supra From Try To Take The Turbo Off By Sawing The Downpipe. The Question Is Can I Get It Welded Or Should I Buy A New Downpipe?

Im About To Start On Putting The Head Gasket In Tommorow And I Know Thats What I Gotta Be Foused On, Im Ready.

Thanks For Your Time.

Pic Of The Half Sawed Downpipe>


29543



sorry its a razor phone pic. blurry

[7M-KDL]

id get a new one, especially if you have some extra money laying around. you are going to want to upgrade it later anyway. why spend money to fix it then get a new one in a month...i say get a new one now and "save" money

[rayall01]

Ahem, that's not the downpipe, it's the turbo elbow. Some downpipes attech to the elbow, and a few, replace it entirely. Either, get a new elbow, or the style of downpipe that replaces it.


http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=250438192705&viewitem=&sspagename=STRK%3AMEWAX%3AVRI

[7M-KDL]

Ahem, that's not the downpipe, it's the turbo elbow. Some downpipes attech to the elbow, and a few, replace it entirely. Either, get a new elbow, or the style of downpipe that replaces it.


http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=250438192705&viewitem=&sspagename=STRK%3AMEWAX%3AVRI

oops, i probably should have mentioned that. i forgot in my post bc i plan on getting a DP with the integrated elbow and i forgot that most do not have the elbow included....my bad

[rayall01]

Here's the downpipe I was talking about.

http://cgi.ebay.com/ebaymotors/Downpipe-Down-Pipe-Dual-Flex-7MGTE-MKIII-Cressida-Supra_W0QQcmdZViewItemQQhashZitem4ce988bf4dQQitemZ330335567693QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

[smokemyocum]

alirght thanks guys for the info

[7mgte1988]

That looks funny... Iam curious is the elbow welded to the turbo if not why would he try to cut the elbow to take the turbo off??

[BGood]

Also, that is cast iron, and is harder to weld, would cost more than just welding steel due to having to heat up/ cool down the part prior and post welding.

[dumbo]

That looks funny... Iam curious is the elbow welded to the turbo if not why would he try to cut the elbow to take the turbo off??

Nuts are prolly stripped.


As for the DP rayall01 pointed out, I have that one and unless your a do it yourself her I would advise the BIC version. The flange wasn't true on mine(still sealed thouh:biglaugh:), it didn't quite mate to my turbo, and my first run I hit 15psi(stock WG Spring) because it didn't let my WG open, had to take it off and do more grinding.

Just thought I would post this because since they are small problems without a aircompressor and die grinder it'd be a really hassel.

[92nsx]

Here's the downpipe I was talking about.

http://cgi.ebay.com/ebaymotors/Downpipe-Down-Pipe-Dual-Flex-7MGTE-MKIII-Cressida-Supra_W0QQcmdZViewItemQQhashZitem4ce988bf4dQQitemZ330335567693QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

^^^+2.

Just pick up a new 3" downpipe with the elbow built in.

Pros: Easy to install; one less gasket to leak; 20-25 HP gain; your going to upgrade anyways so do it now and save the $$ from buying and shipping on a used elbow.

Cons: Ummm... NONE :biglaugh:

[smokemyocum]

Yea I Prolly Will Go Ahead And Buy The Downpipe With The Elbow Built In. I Have No Welder Or Anything. Im Not Sure If He Was Trying To Take The Turbo Off But Thats What I Thought. He Took Off The Catalytic Converter Also.

[92nsx]

My catalytic converters are also missing :evil2:

[rayall01]

Nuts are prolly stripped.


As for the DP rayall01 pointed out, I have that one and unless your a do it yourself her I would advise the BIC version. The flange wasn't true on mine(still sealed thouh:biglaugh:), it didn't quite mate to my turbo, and my first run I hit 15psi(stock WG Spring) because it didn't let my WG open, had to take it off and do more grinding.

Just thought I would post this because since they are small problems without a aircompressor and die grinder it'd be a really hassel.

I wasn't saying he should get that one particularly, just using that as a quick to find example of what I was talking about.

[smokemyocum]

what do u think sounds like without the catalytic converter?