New Product: Raptor Racing Feramic W58 & R154 Clutches

[Raptor Racing]

At Raptor Racing we're committed to bring you the finest products for your Supra. So when we found a manufacturer that was willing to build a Feramic Clutch to our specs we jumped at the opportunity. Feramic disks are unique simply because there are not many companies that sell Feramic clutches for the Supra. Why? They Last Long!! They Hold the Power!! They are Streetable AND Slipable!!

Yes it's hard to believe you get everything you want in a clutch; and all this without the need for a knee breaking 3000lb pressure plate. If Feramic is so great you may be asking why everyone is not making clutches out of Feramic? Very Simple: this clutch will last you years and will take more abuse than you can throw at it. Which means you won't be back to buy a replacement disk from us for a LONG LONG Time.

Each Kit comes with a BRAND NEW Pressure Plate; Sprung 4 or 6 Puck Disc; Pilot Bearing; Throw out Bearing and Alignment Tool. There are no stages with these clutches; there is no point. They are sold with either 4 pucks or 6 pucks; believe me when I say the 4 puck was insanely streetable compared to any other 4 Puck Clutches. Upgraded pressure plates are NOT needed or advised with this clutch as it totally eliminates the purpose of using Feramic (in our opinion). If you're running THAT much power (650+HP) we strongly suggest a Spec-Twin Disc (which we can also offer you).

Another reason we don't advise the use of Heavier Pressure plates with Feramic Clutches is that Aluminum flywheels have been know to fuse to Feramic Clutches. While we feel that the chances of this happening with an OEM Pressure plate is rare we feel it's only right to warn you that under 'ideal' conditions its 'possible' even with an OEM Pressure Plate. The Speedtoys MK1/MK2 has this same Feramic Clutch w/Aluminum Flywheel in their MK1/MK2 and never once had an issue but we felt the warning needed to go out anyway.

Your next question is going to be: How Much HP can it hold. First off clutches don't hold HP they hold Torque. SpeedToys in PA has been testing this clutch for over 2 years; and in that time frame they have had more 12 second passes in their MK1/MK2 than most of us will have in our lifetime. When they took the motor apart to swap it into another car the clutch had shown excellent wear characteristics.


If you have a documented 450+ lb/ft of torqueMK2/ MK3 and are willing to testify(good or bad) on Supramania and/or CelicaSupra as to the feel and holding capacity of this clutch please send us an email/pm. We are EXTREMELY confident that this clutch can hold an excess of 500lb/ft of torque that we're willing to offer someone a steal and a half to prove it. Only vehicles with a dyno of 450rwhp+ and vehicles well known in the community will be considered. If we select you and you can slip this clutch you just earned yourself a free clutch.

Until the end of May 16th we are offering 10% off the regular price (posted below).

Introduction Pricing to May 16th

Raptor Racing R154 4 Puck Feramic Clutch Set: $535USD w/free Shipping to the USA
Raptor Racing R154 6 Puck Feramic Clutch Set: $558USD w/free Shipping to the USA
Raptor Racing W58 4 Puck Feramic Clutch Set: $373USD w/free Shipping to the USA
Raptor Racing W58 6 Puck Feramic Clutch Set: $396USD w/free Shipping to the USA

For anyone going to the MK2 North East Meet in May there will be at least 3 cars there with this clutch; please see Damon if you are interested in testing this clutch. Please do keep in mind though that Damon is hosting a meet so we'd all appreciate that if you're requesting a test drive that you're seriously considering purchasing a clutch. For those going to the NE MK2 Meet I can take off another $15 if you want to pick it up there. Please note that if want to pick it up at the PA meet payment will need to be made by the 5th of May.


Pricing (Valid AFTER May 16th)
Raptor Racing R154 4 Puck Feramic Clutch Set: $595USD w/free Shipping to the USA
Raptor Racing R154 6 Puck Feramic Clutch Set: $620USD w/free Shipping to the USA
Raptor Racing W58 4 Puck Feramic Clutch Set: $415USD w/free Shipping to the USA
Raptor Racing W58 6 Puck Feramic Clutch Set: $440USD w/free Shipping to the USA

Canadian Residence

○ All Canadians must add 5% GST and Ontario Residence must add 8% PST
○ Toronto Residence do not pay additional shipping; price above is the price you pay
○ Outside of Toronto add $20 for Shipping

PLEASE NOTE THAT FIRST UNITS WILL BE SHIPPING END OF MAY


http://img.photobucket.com/albums/v346/raptorracing/DSC04294.jpg

[Frankenstien]

I'm getting one of these, hopefully within a week or two.

[kotu100]

so did anyone on the forum ever put 450+ lb/ft tq through one of these? im in the market for a new clutch right now, and just did 410wtq this past weekend and will be going up to 500 very soon.
i bring my supra to the track quite a bit too, still need a tester?

[Raptor Racing]

No sir...nobody has come forward yet. I've sold more than 2 dozen and nobody has come forth with a confirmed dyno making the kind of power I would like to see. Since nobody has come forward yet the first person who does will get a large discount on their purchase. As stated in my first post this person will need be relatively well know in either Supramania or Celicasupra community.

[kotu100]

what what be considered well known?
i've been a member for a couple years now and post regularly.

would you be intrested in offering me the discount, if so i could get ou a dyno sheet within a week of putting it in since i have to tune again anyway.
like i said before i did 410wtq @ 14.5 psi and i plan on turning it up to 18. that should deff get me past the 450wtq you're looking for.

shoot me a pm if your intrested or wanna know more.