PDA

View Full Version : has any one installled a maft pro in a 7mge


NashMan
03-25-2009, 02:00 AM
well i am asking this qestion cause i want to know the gains

i might do this to my trcuk


afm look's to be a hog
shaeff
03-25-2009, 07:41 AM
CRE did it. Check the N/A forum.
AJ'S 88NA
03-25-2009, 10:34 AM
I have also :) I think Cuel is ready to but hasn't yet that I know of.
NashMan
03-25-2009, 01:55 PM
so no befor and after yet
NashMan
03-25-2009, 03:53 PM
reson being is want to install one in my truck that has the 3VZ-E it runs on the same stuff the 7mge does so it chould be wired in pretty easy

just want to know if that afm robs crap load of power
AJ'S 88NA
03-25-2009, 10:17 PM
It has made a difference in mine and I know CRE has said in his. I haven't been able to dyno mine again to see how much difference. The throttle responce is great.

The thing about the Maft-Pro with a wideband is you can tune it yourself. With a GE it is a longer process to tune than with a GTE. I know I couldn't have tuned mine, which I'm still working on, without CRE's help, but I am a little challenged technically.

It makes a good addition to a GE if you have moded a motor, i.e. cams, ported head, bored, stroked, the Maft-Pro is what I would suggest because you have changed enough that a stock ECU is just not going to cut it. Mine would run, just not very well.

I could guess around 20 more at the wheels +/- a couple.