LSD for MK2 Supra

[7mgt-66e]

Jose, I spoke with you concerning a LSD for my MK2 Supra. You mention you could get Kaaz or Tomei. I checked their websites and it showed nothing for my car. Can you verify that and if they do have one, how much and info please? I'm looking to get one.

[83restomod]

+1 on this. post up some prices please.

[soapra]

Ok guys I will look to it.

[kcheng]

altezza with the 4 banger in japan use the 7.5" diff that can be used in mk2

[soapra]

Still checking guys, sorry for the lag. I'm also checking in to the Altezza diff.

[Jeff Lange]

Pretty sure a Tomei TFA should fit fine. It is listed for the GXE10 Altezza. The OE Altezza GXE10 diff case part number is 41311-22060, which was also used in the MX73 Cressida. 41311-22050 changes up to 41311-22060, 41311-22050 was used in the MA61 Supra.

So that covers the ring gear fitting onto the TFA diff, only other question is the axle splines.

The GXE10 side gears are part number 41331-14040, which are the same part number as the MA61 Supra.

So that covers the axle spline size being the same.

41311-22050 changes up to 41311-22060 (as stated previously), it is a multiple change up and includes the side bearings, which are 90368-50006, the same part number as the GXE10 Altezza.



These facts have lead me to believe the Tomei TFA diff should fit the MA61 Supra.

Jeff

[soapra]

If that is the case, I have good relations with Tomei USA. I will talk with the owner today.