Installing a shifter bushing set.

[funky_monkey58]

I did this write up awhile back and thought I would post it here also.

To install first remove the interior pieces necessary to get to your shifter.

Then remove shifter, remove the plastic cup on the bottom of the shifter.

Press on the new plastic cup to the bottom of the shifter, now that is ready for the next step.

Use a flat headed screw driver to pry the old cup out of the tranmission.

Here it is removed.
http://i41.photobucket.com/albums/e253/funky_monkey58/suprabracingclearance002.jpg

To install follow these photos.

http://i41.photobucket.com/albums/e253/funky_monkey58/suprabracingclearance009.jpg
http://i41.photobucket.com/albums/e253/funky_monkey58/suprabracingclearance010.jpg\
http://i41.photobucket.com/albums/e253/funky_monkey58/suprabracingclearance011.jpg
http://i41.photobucket.com/albums/e253/funky_monkey58/suprabracingclearance012.jpg
http://i41.photobucket.com/albums/e253/funky_monkey58/suprabracingclearance015.jpg

Then take this guy.
http://i41.photobucket.com/albums/e253/funky_monkey58/suprabracingclearance001.jpg
Reinstall and your done enjoy a nice tight shifter once again.

-Sean