welding new runners to an aluminum intake

[jast14]

I need some one or a shop that can weld some new runners on to an aluminum intake manifold. I live in Arlington TX so if any one can do it or knows a place that will pls drop me a PM or post. I have all rdy called a lot of shops and no luck.

THX

[fstoy]

What are you trying to do? Just about any welding shop that can TIG weld should be able to do it.

[jast14]

I got a 1jzgte custom aluminum intake that I was going to put on a 1jz but the deal with the motor did not come through. I got a good deal on a redone 7mgte and picked it up. I still would like to use the manifold but I need the runner on it cut off and 7mgte lower runners welded on. the runners don't line up just right so you may have to cut off the bottom plate and make a new one with the 7mgte runners on it. but ever place I call says they don't do stuff like that.

[jast14]

Pic of the manifold

[MKIIINA]

contact supraguy88t over on SF and he should be able to hook ya up.. hes the resident mk3 guru in dfw ;)

[zoonwen]

if you dont wanna cut that one up ' i'll buy it from you ...